Electrolux 50674 user manual What to do if, Moving the machine

Page 27

What to do if ... 27

Moving the machine

If you have to move the machine (moving house etc....):

1.Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.

What to do if ...

The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Switch off the dishwasher and carry out the following suggested corrective actions.

 

Fault code and malfunction

 

Possible cause and solution

 

 

 

 

continuous flashing of the light of the run-

The water tap is blocked or furred with lime-

 

ning programme,

 

scale.

1 flash of the end of programme indicator

 

Clean the water tap.

 

light,

• The water tap is turned off. Turn the water tap

 

 

The dishwasher does not fill with water.

 

on.

 

 

• The filter (where present) in the threaded hose

 

 

 

fitting at the water inlet valve is blocked.

 

 

 

Clean the filter in the threaded hose.

 

 

The water inlet hose has not been correctly

 

 

 

laid or it is bent or squashed.

 

 

 

Check the water drain hose connection.

 

 

 

 

continuous flashing of the light of the run-

The sink spigot is blocked.

 

ning programme,

 

Clean out the sink spigot.

• 2 flashes of the end of programme indicator

 

The water drain hose has not been correctly

 

light,

 

 

laid or it is bent or squashed.

 

 

 

The dishwasher will not drain.

 

Check the water drain hose connection.

 

 

 

continuous flashing of the light of the run-

Close the water tap and contact your local

 

ning programme,

 

Service Force Centre.

3 flashes of the end of programme indicator light,

Anti-flood device is activated.

Image 27
Contents Favorit Dear Customer Contents Installation instructions Correct use Safety informationGeneral safety Child safetyInstallation Product description Control panel Indicator lightsFunction buttons Setting modeSet the water softener First useSetting electronically Setting manuallyUse of dishwasher salt ExamplesTo fill Only use branded rinse aid for dishwashers Use of rinse aidDaily use Adjusting the dosage of rinse aidLoading cutlery and dishes Lower basket Cutlery basket Upper basket Fill with detergent Use of detergentDetergent tablets Multi-tab functionActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multi-Tab functionSelect and start a washing programme Washing programmesCancelling the delay start and / or a washing programme Setting and starting the programme with delay startInterrupt a washing programme in progress Care and cleaningCleaning the filters Unloading the dishwasherClean all filters thoroughly under run- ning water Frost precautions Cleaning the spray armsExternal cleaning Internal cleaningMoving the machine What to do ifProgramme does not start Technical data Technical dataExample loading arrangements Hints for test institutesLower basket with cutlery basket Cutlery basket Installation Fitting under a counter kitchen worktop or sinkProceed as follows Levelling Water supply connectionsLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Sink trap spigot, the entire plastic mem Electrical connectionPackaging material Environment concernsPage Page Page Subject to change without notice

50674 specifications

The Electrolux 50674 is a state-of-the-art vacuum cleaner that combines advanced engineering with user-friendly features, making it a standout choice for homeowners looking to maintain a clean and dust-free environment. This model is designed with versatility and efficiency in mind, catering to various cleaning needs across different surfaces.

One of the key features of the Electrolux 50674 is its powerful suction technology. Equipped with a high-efficiency motor, this vacuum delivers exceptional performance, ensuring that even the most embedded dirt and pet hair are effectively removed from carpets, hardwood floors, and upholstery. The adjustable suction settings allow users to customize the power according to the surface being cleaned, providing a tailored cleaning experience.

The design of the Electrolux 50674 is another highlight. Its lightweight and ergonomic structure facilitate easy maneuverability, making it simple to navigate around furniture and reach tight spaces. The vacuum features a sleek, modern aesthetic that is both practical and visually appealing, fitting seamlessly into any home décor.

In addition to its physical design, the Electrolux 50674 incorporates advanced filtration technology. The vacuum is fitted with a HEPA filter that captures 99.97% of dust, allergens, and pollutants as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers and households with pets, as it helps to improve indoor air quality and create a healthier living environment.

The vacuum comes with a variety of attachments, including a crevice tool, upholstery brush, and dusting brush, which enhance its versatility and functionality. Whether you need to clean delicate surfaces or tackle stubborn corners, the Electrolux 50674 provides the necessary tools to get the job done effectively.

Another noteworthy characteristic is the vacuum's noise-reduction technology, ensuring quieter operation during use. This feature allows users to clean their homes without the disruptive sounds often associated with traditional vacuum cleaners.

With its combination of power, flexibility, and advanced filtering capabilities, the Electrolux 50674 proves to be an excellent investment for anyone seeking a reliable cleaning solution. Whether you are dealing with daily messes or deep-cleaning tasks, this vacuum cleaner meets the demands of modern living while making the cleaning process as effortless as possible.