Electrolux EOU43003 Clock Functions, How to use the clock functions, Countdown, Cook time

Oven function

Defrost

electrolux 7

Application

For defrosting e. g. flans and gateaux, butter, bread, fruit or other frozen foods.

Clock Functions

•Countdown - See appropriate chapter on setup. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven.

•Cook time - is used to set the desired period of cooking time.

•End time - when set the appliance is turned off at desired time.

•Time - shows the current time.

How to use the clock functions

•After a function has been selected, the corresponding function indicator flashes for about 5 seconds. During this period, the desired times can be set using the in-

crease or decrease button.

•When the desired time has been set, the function indicator continues to flash for ap- prox. 5 seconds. After that the function in- dicator is then lit. The set time begins to run.

•Press any of the buttons to stop the audi- ble signal.

•The desired oven function and tempera-

ture can be selected before or after the

clock functions Cook time and End

time are set.

•When the cooking process is completed, turn the oven function dial and the tem- perature selector back to the OFF position.

Countdown

1.Press the Mode button repeatedly un- til the function indicator Countdown flashes.

2.Using the increase or decrease button set the desired Countdown (max. 2 hours 30 minutes).

3.After approx. 5 seconds the display

shows the time remaining. The function indicator Countdown lights up.

4.When the time has elapsed, the function indicator flashes and an audible signal sounds for 2 minutes. The signal can be stopped by pressing any button.

Cook time

1.Press the Mode button repeatedly un- til the function indicator Cook time flashes.

2. Using the increase	or	decrease
button set the desired cooking time.
After approx. 5 seconds the display re-
turns to showing the current time. The
function indicator Cook time		lights
up.

When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off.

3.The signal and the programme can be stopped by pressing any button.

End time

1.Press the Mode button repeatedly un- til the function indicator End time flashes.

2. Using the increase	or	decrease
button set the desired switch-off time.
After approx. 5 seconds the display re-
turns to showing the current time. The
function indicator End time		lights up.

When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off.

3.The signal and the programme can be stopped by pressing any button.

Cook time and End time combined

Cook time and End time can be used simultaneously, if the oven is to be switched on and off automatically at a later time.

1.Using the Cook time function, set the time required for cooking the dish.

2.Using the End time function, set the time at which the dish should be ready.

The function indicators Cook time

and End time light up and the current time is shown in the display.