Installation, Regulations, Connection | Electrolux EHG 66, EHG 65

Installation

Important

This appliance must be installed by qualified personnel.

The installer shall verify the satisfactory operation of the ignition system on all burners both individually and in combination.

The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.

Regulations

This appliance shall be installed in accordance with the manufacturer’s installation instructions, local gas fitting regulations, municipal building codes, AS5601 (AG601) and any other relevant statutory regulations.

Data label

The data label is located on the bottom of the appliance. This appliance is suitable for Natural or Universal LPG. Ensure that the gas supply matches the data label. A duplicate of the data label is supplied in the packaging of the user manual and must be attached to readily accessible adjacent surfaces of the appliances.

Connection to the gas supply

Gas connection must be carried out in conformity with the regulations in force. The appliance leaves the factory tested and regulated for the type of gas indicated on the plate which is situated in the lower position near the gas connection tube. Ascertain that the type of gas with which the appliance will be supplied is the same as that indicated on the plate.

If different carry out all the operations according to the indications cited in the paragraph “adaption to different types of gas”.

For a maximum output and minimum consumption ascertain that the pressure of the gas used has the values indicated in the table of “burner characteristics”.

The joint is mounted on the intake area of the pipe, fitted with a filleted nut G 1/2", between the sealing components. Screw the parts without forcing, turn the joint in the direction required and then tighten everything.

Connection

Carry out the connection to the gas plant only by means of a rigid metallic pipe conforming to the regulations in force. This appliance is not suitable for connection with a hose assembly. The joint for the entry of gas into the appliance is threaded R 1/2" (male thread).

Carry out the connection avoiding any type of stress on the appliance.

It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connecting pipe. Failure to ensure the correct assembly will cause leakage of gas.

	FO 0814
	FO 0814
	A) End of shaft with nut
	B) Washer
FO 0264	C) Elbow

Natural gas appliances must be fitted with a pressure regulator and be installed at the inlet connection. The gas pressure must then be set as a part of the commissioning procedures.

For U-LPG the pressure adjustment is made via the regulator fitted at the domestic cylinder.

The natural gas regulator and U-LPG pressure test point must be accessible with the appliance installed.

Important

Upon completion of installation, always check:

λthat all the joints are completely sealed by using a soapy solution, never a flame;

λthat the gas pressure has been regulated to 1.00kPa for Natural Gas and 2.75kPa for Universal-LPG. The pressure test point is located on the regulator. The pressure should be measured and adjusted with the Wok burner on high flame;

λthat the automatic ignition system is operating satisfactory on all burners, both individually and in combination;

λthat the burners operate correctly, are stable, without yellow tipping or excessive noise on high and low flame.

Then demonstrate to the customer the appliance operation and leave these instructions.

EHG 65, EHG 66 specifications

The Electrolux EHG 66 and EHG 65 are innovative cooking appliances that showcase the brand's commitment to efficiency, style, and modern technology. Both models are designed to meet the demands of contemporary kitchens while ensuring optimal performance and ease of use.

The Electrolux EHG 66 features a sleek, stainless-steel design that complements any kitchen decor. Its powerful burners deliver impressive heat output, allowing for rapid cooking and precise temperature control. With a total of five burners, including a high-efficiency gas burner, users can easily prepare multiple dishes simultaneously. The EHG 66's integrated wok burner is particularly noteworthy, providing an intense flame for stir-frying and other high-heat cooking techniques.

In contrast, the Electrolux EHG 65 offers a slightly more compact option, making it suitable for smaller kitchens or those looking to maximize counter space. Despite its smaller footprint, the EHG 65 does not compromise on performance. It features four burners, including a robust dual-wok burner, ensuring versatile cooking options. Both models are equipped with an automatic ignition system, allowing for quick and safe burner activation with just a simple turn of the knob.

One of the standout features of these Electrolux models is their innovative flame failure safety device. This essential safety feature automatically cuts off the gas supply in the event that a flame goes out, providing peace of mind for users. Additionally, the durable enamel pan supports provide excellent support for pots and pans, ensuring stability while cooking.

Both the EHG 66 and EHG 65 are also designed with ease of maintenance in mind. The removable pan supports and smooth surface simplify the cleaning process, allowing users to maintain a hygienic cooking environment. The appliances are compatible with a variety of cookware, including induction-ready pots, ensuring versatility in the kitchen.

Overall, the Electrolux EHG 66 and EHG 65 combine superior performance, safety features, and stylish design, making them excellent choices for any cooking enthusiast. Whether you are a professional chef or a home cook, these gas hobs provide the flexibility and functionality needed to create delicious meals with ease. With Electrolux, users can trust that they are investing in quality appliances that enhance their cooking experience for years to come.