Installation Instructions

32 electrolux installation instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appli- ances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.

The sealant seals the appliance to the work top with no gap.

When building in, protect the underside of the appliance from steam and mois- ture, e.g. from a dishwasher or oven.

Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.

WARNING!

Risk of injury from electrical cur- rent.

•The electrical mains terminal is live.

•Make electrical mains terminal free of voltage.

•Observe connection schematic.

•Observe electrical safety rules.

•Ensure anti-shock protection through correct installation by a qualified electrician.

•The appliance must be connected to the electrical supply by a qualified electrician.

IMPORTANT!

Risk of injury from electrical cur- rent.

Loose and inappropriate plug and sock- et connections can make the terminal overheat.

•Have the clamping joints correctly in- stalled by a qualified electrician.

•Use strain relief clamp on cable.

•In the event of single-phase or two- phase connection, the appropriate mains cable of type H05BB-F Tmax 90°C(or higher) must be used.

•If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). The latter is availa- ble from the Customer Care Depart- ment.

A device must be provided in the electri- cal installation which allows the appli- ance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the hold- er), earth leakage trips and contactors.

Sticking on the seal

•Clean the worktop around the cut- out area.

•Stick the single-sided adhesive seal- ing tape provided on the underside of the hob around the outside edge ensuring that it is not stretched. The two ends of the tape should join in the middle of one side. After trim- ming the tape (allow it to overlap by 2-3 mm), press the two ends togeth- er.

EHD68200P specifications

The Electrolux EHD68200P is a cutting-edge induction hob designed to elevate your cooking experience. Known for its sleek design and efficient technology, this appliance stands out in modern kitchens. It features a black glass ceramic surface that is not only stylish but also easy to clean, making it a practical choice for daily use.

One of the main features of the EHD68200P is its Induction technology. This innovative heating method uses electromagnetic energy to directly heat pots and pans, ensuring that heat is applied precisely where it's needed. This results in quicker cooking times and significantly reduced energy consumption compared to traditional gas or electric hobs. With the induction system, users can enjoy the convenience of immediate heat adjustments, allowing for enhanced control over the cooking process.

The hob is equipped with four cooking zones, each providing varying power levels to accommodate different cooking methods. Furthermore, the zones feature a Boost function, which allows for rapid heating to quickly reach high temperatures, making boiling and frying tasks more efficient. Each zone is carefully designed for compatibility with various cookware materials, including stainless steel and cast iron, ensuring versatility in meal preparation.

The Electrolux EHD68200P also boasts a range of intuitive controls. Its touch controls allow for easy adjustments to power settings, while the digital LED display provides a clear view of the selected temperature. Safety features such as residual heat indicators are integrated, alerting users to ensure the surface isn't hot when cleaning or when children are nearby.

Another remarkable characteristic is the hob's automatic pan detection feature. This technology ensures that the induction zones only activate with suitable cookware placed on them, enhancing both safety and energy efficiency. Additionally, the hob includes a timer function that allows users to set precise cooking times for each zone, promoting more efficient cooking practices.

In terms of design, the Electrolux EHD68200P seamlessly blends contemporary aesthetics with functionality, making it a strong addition to any kitchen layout. With its combination of advanced technology, user-friendly features, and elegant design, this induction hob truly represents the pinnacle of modern cooking appliances. Whether you are a seasoned chef or a home cook, the EHD68200P is built to enhance your culinary endeavors.