Electrolux DSIG 320 Connecting to GAS, Fitting the Battery, Pressure Testing, Checking the Grill

Page 38

4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less than R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO RESET VALVE I.E.: DO NOT USE P.T.F.E. SEALANT

TAPE.

Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

250

Fig.3

650

400

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

5. FITTING THE BATTERY

1.

The battery is located on the left hand side of the front plinth.

 

2.

To gain access to the battery, open the main oven door and lift up

Fig.4

 

the battery holder lid.

 

3.Fit the new battery ensuring (+) terminal is next to the (+) sign on the battery. See Fig.4.

4.Close the lid of the battery holder

6. PRESSURE TESTING

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box. Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide

burner off injector, whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.Gas The pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap full on and pressing the ignition button on the fascia panel. As soon as the burner is lit the button can be released.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Dsig For your safety IntroductionContents Lighting the appliance HotplateGrill OvenTo turn off any burner Grill Prior to using the grillGrill control has two heat settings Heat controlPreheating Cooking positionsGeneral Positioning food on the gridGrill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesFor your safety Helpful hints Oven shelves OvenHeat zones MinutesCondensation Baking trays and dishesRoasting Oven cooking chart Large Mins Individual Cakes Christmas cake Hours Mins. per ½kg 1lb and 25 minsMinutes for each ½kg 1lb Baking tray Fruit pie shortcrust MinsMince pies flan pastry Mins Mins Rolls and bunsSlow cooking Food preparation-slow cookingThaw thoroughly before cooking Do not cook casseroles over 2.7kg 6lbCover food with a tight fitting lid or tin foil Add towards the end of the cooking to prevent curdlingCleaning the brass plated handle Where applicable When replacing hotplate burner parts Crown to body Do not try to force the crown on to the bodyGrill This will help to reduce fat Boil overOven roof SplashingCare and cleaning You can remove the glass from the oven door if you need to Cleaning between the outer and inner door glassTo remove the outer glass Location Cleaning The Door GlassInstalling the appliance Make sure that a stability bracket is fittedOverall Height 898mm-920mm Cooker dimensionsPositioning Width 498mm DepthMoving your appliance General information For your safetyBattery For your safety What is wrong and why? WhtiswrogdnaService and spare parts 7 0 5 9 2 9 9 2Customer Care Department Installation Instructions Technical Data DimensionsImportant Safety Requirements Provision for VentilationLocation of Appliance Fitting the Stability Bracket Parts RequiredLevelling the Appliance Pressure Testing Connecting to GASFitting the Battery Checking the GrillChecking the Main Oven Checking the HotplateChecking LID CUT-OFF Device General NoteT E S T E S DSIG320 Contents Check List 55 77 High Street Telephone 0870 5 Part Number311594903

DSIG 320 specifications

The Electrolux DSIG 320 is an advanced dishwasher that brings efficiency and innovation to modern kitchens. Designed with the user in mind, it combines cutting-edge technology with practical features, making dishwashing a breeze.

One of the standout features of the DSIG 320 is its impressive energy efficiency rating. It operates quietly and consumes minimal water and electricity, thus reducing both your utility bills and environmental impact. This sustainable design aligns perfectly with the growing demand for eco-friendly household appliances.

The DSIG 320 utilizes advanced washing technology that includes a unique Jet Spray system, which ensures that every dish is thoroughly cleaned. This system employs powerful jets that reach every corner of the loading area, making it possible to remove even the most stubborn food residues. Additionally, the dishwasher is equipped with multiple wash programs, including intensive, normal, and quick wash cycles, catering to various needs and preferences.

Another notable characteristic of the Electrolux DSIG 320 is its spacious interior. The dishwasher comes with flexible racking options that allow users to adjust the height and layout of the shelves to accommodate larger pots, pans, and utensils. This versatility ensures that you can load your dishwasher in a way that maximizes space while still achieving optimal cleaning results.

Furthermore, the Electrolux DSIG 320 boasts an easy-to-use control panel, featuring a clear digital display that provides real-time information about the wash cycle and remaining time. This user-friendly interface simplifies operation and allows users to monitor their dishwashing progress effortlessly.

The dishwasher also incorporates advanced drying technology. After the wash cycle is complete, the DSIG 320 utilizes Fan Dry technology, which circulates air to effectively dry dishes without leaving any water spots or residue. This ensures that your dishes come out sparkling clean and ready to use.

Safety is another important consideration in the design of the DSIG 320. It is equipped with a child lock feature, preventing accidental interruptions during operation.

In summary, the Electrolux DSIG 320 is a reliable and efficient dishwasher that enhances the dishwashing experience through its innovative features, eco-friendly design, and user-centric performance. Whether you have a busy household or simply want a convenient kitchen solution, the DSIG 320 is a compelling choice for those looking to upgrade their kitchen appliances.
Top Page Image Contents