When All Hookups are Complete

GAS COOKTOP INSTALLATION INSTRUCTIONS

(For 30" & 36" Models)

2.Turn on Electrical Power and Open Main Shutoff Gas Valve

3.Check the Igniters

Operation of electric igniters should be checked after cooktop and supply line connectors have been carefully checked for leaks and the cooktop has been connected to electric power.

To operate the surface burner:

A.Push in and turn a surface burner knob to the LITE position. You will hear a small ticking noise; this is the sound of the electric ignitor which lights the burner.

B.After the burner lights, turn to the desired flame size. The controls do not have to be set at a particular mark. Use the marks as a guide and adjust the flame as needed.

4.Adjust the “low” setting for regular surface burner valves (Figure 12)

Be careful when performing this operation.

a.Push in and turn control to LITE until burner ignites.

b.Quickly turn knob to LOWEST POSITION.

c.If burner goes out, reset control to OFF.

d.Remove the surface burner control knob.

e.Insert a thin-bladed screwdriver into the hollow valve stem and engage the slotted screw inside. Flame size can be increased or decreased with the turn of the screw. Turn counterclockwise to increase flame size. Turn clockwise to decrease flame size. Adjust flame until you can quickly turn knob from LITE to LOWEST POSITION without extinguishing the flame. Flame should be as small as possible without going out.

Note: Air mixture adjustment is not required on surface burners.

5.Adjust the "LOW" Setting of the Dual Burner Surface Valve (Figure 12)

Note: On the dual valve the low setting of each portion should be adjusted individually.

a. Push in and turn control to LITE until the rear portion of the bridge burner ignites only.

b. Quickly turn knob to LOWEST POSITION. c. If burner goes out, reset control to OFF. d. Remove the surface burner control knob.

e. The rear or outer portion of the burner flame size can be increased or decreased with the turn of the screw A. Use screw B to adjust the flame size of the center portion of the burner. Turn counterclockwise the screw to increase flame size. Turn clockwise the screw to decrease flame size. Adjust flame until you can quickly turn knob from LITE to LOWEST POSITION without extinguishing the flame. Flame should be as small as possible without going out.

Note: Air mixture adjustment is not required on surface burners.

Clockwise

Counterclockwise

Hollow
Valve
Stem	B
	B
Regular
Burner
Valve	Dual
	Dual
	Valve
	Figure 12

Make sure all controls are left in the OFF position.

Make sure the flow of combustion and ventilation air to the cooktop is unobstructed.

Before You Call for Service

Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

Refer to the warranty in your Use and Care Guide for our service phone number and address. Please call or write if you have inquiries about your product and/or need to order parts.

EW30GC55G specifications

The Electrolux EW30GC55G is a versatile and efficient freestanding gas range that combines stylish design with advanced cooking technology. Ideal for both amateur and seasoned home chefs, this model offers a plethora of features that enhance the cooking experience.

One of the standout characteristics of the EW30GC55G is its powerful gas burners. With five sealed burners, including a high-output burner which delivers up to 18,000 BTUs, this range allows for precise temperature control, making it perfect for everything from simmering delicate sauces to searing meats. The burners are designed to provide even heat distribution, ensuring that food is cooked thoroughly and efficiently.

This range includes a spacious oven with a generous 5.4 cubic feet capacity, which is suitable for large meals and entertaining. The oven features a convection cooking system that circulates hot air throughout the oven, resulting in quicker and more even baking. With an integrated temperature probe, chefs can monitor the temperature of their dishes without opening the oven door, ensuring perfectly cooked results every time.

In terms of ease of use, the Electrolux EW30GC55G offers user-friendly controls. The slide-in design allows for easy access to the oven and cooktop, while the intuitive control panel makes adjusting settings straightforward. The range is also equipped with a self-cleaning feature, which simplifies maintenance and helps keep the oven in pristine condition.

Another notable aspect of this model is its sleek, stainless steel finish, which not only adds a modern touch to kitchen décor but is also resistant to smudges and fingerprints. The range’s continuous grates provide a seamless cooking surface, allowing for easy movement of pots and pans across the burners.

Safety is a priority with the EW30GC55G, as it includes features like a flame failure device, which automatically shuts off the gas supply if a burner’s flame goes out, providing peace of mind for users while cooking.

In summary, the Electrolux EW30GC55G combines functionality, style, and safety, making it an excellent choice for anyone looking to elevate their cooking experience. Its advanced burner technology, spacious convection oven, and user-friendly features make it a standout in home kitchens, suitable for everyday meals and special occasions alike.