Electrolux SIG 224 G manual Fitting the Stability Bracket Not supplied, Connecting to Gas

Page 18

 

 

300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

245 mm.

 

 

PLAN VIEW OF THE COOKER

SIDE VIEW

FO 2434

OF THE COOKER

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See Safety Requirements: Page 16).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place the cooker in its intended position and level cooker.

Mark off 245mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

 

600

450

 

130

 

FO 2435

Fig. 3

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents SIG 224 G Important Safety Information Contents Guide to Use the instructionsDescription of the Cooker Control PanelOven Cavity AccessoriesOperation Hob burnersGas oven Before the First Use of the CookerOven Function Control Knob Cookware Using the OvenCondensation and steam Effects of dishes on cooking resultsOven safety device Using the Gas ovenBefore using your oven Grill burner ignitionGas Oven Cooking Charts Meat & PoultryPuddings How to Use the Grill GrillingMaintenance and Cleaning Cleaning the OvenOven lamp replacement Oven ShelvesSymptom Solution Something Not WorkingService and Spare Parts Guarantee ConditionsDimensions Instructions for the InstallerImportant Safety Requirements HobPositioning the Appliance Fig Location of the applianceConnecting to Gas Fitting the Stability Bracket Not suppliedElectrical connections Permanent ConnectionCommissioning Minimum level adjustment of gas oven burner Replacement of gas oven burner nozzleConversion from Natural to LPG Gas Replacement of grill burner nozzle Page From the Electrolux Group. The world’s No.1 choice

SIG 224 G specifications

The Electrolux SIG 224 G is a modern built-in gas hob that combines innovative design with practical functionality, making it an ideal choice for both amateur cooks and seasoned chefs alike. This appliance showcases a perfect blend of style, performance, and efficiency, tailored to meet the demands of contemporary kitchens.

One of the standout features of the SIG 224 G is its sleek, minimalist design that integrates seamlessly into your kitchen decor. The appliance is fitted with high-quality stainless steel, providing durability and a professional finish that enhances any kitchen aesthetic. The frameless design makes cleaning easy, as there are no awkward edges or seams for food debris to collect.

The hob itself is equipped with four powerful gas burners that deliver exceptional heat control, allowing users to achieve precise cooking results. The burners are engineered for efficiency, with each one offering varying levels of output. The dual flame burner provides rapid heating for quick boiling, while the simmer burner is perfect for delicate sauces and soups.

Safety is a top priority in the SIG 224 G's design. It features a built-in flame failure safety device that automatically cuts off the gas supply if the flame goes out, ensuring peace of mind during cooking. Additionally, the hob includes ergonomic control knobs that offer easy and accurate adjustments to the flame, even when wearing oven mitts.

The SIG 224 G also incorporates state-of-the-art technologies to enhance cooking performance. The precision enamelled cast-iron grates not only add a robust touch to the appliance but also distribute heat evenly, allowing pots and pans to stabilize properly during cooking. The grates are designed for easy removal, facilitating effortless cleaning.

Furthermore, the hob is compatible with LPG, making it versatile for homes that use different gas types. This adaptability is coupled with easy installation features, making it suitable for a wide range of kitchen configurations.

In summary, the Electrolux SIG 224 G is an exceptional gas hob that reflects the brand's commitment to quality and innovation. With its stylish design, efficient burners, built-in safety features, and user-friendly controls, it stands as a reliable companion for anyone looking to enhance their culinary experiences. Whether for quick meals or elaborate dinner parties, the SIG 224 G is sure to impress in functionality and style.
Top Page Image Contents