Cleaning and care
Attention! Cleaners must not get onto the hot ce- 
ramic glass surface! After cleaning all residues of cleaners must be removed with sufficient clean water, as they may be caustic when being rehea- ted.
Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring powder, or sponges with an abrasive effect.
Suitable cleaning materials are: clean cloth or household paper, hot water with detergent, suita- ble commercial cleaners and cleaning scrapers. Cleaning scrapers and ceramic glass cleaners are available from the expert trade and in markets for building material.
Ceramic glass surface
. Clean the ceramic glass surface after every use when it is hand warm or cold. This will avoid spills becoming burnt on.
. Remove scale and water marks, fat spots and metallic shimmering discoloration with a commer- cial ceramic glass cleaner such as Vitroclen.
Light soilage
.
.
.
Wipe the ceramic glass surface with a damp cloth, and a little washing up liquid.
Then rub dry with a clean cloth. No residues of cleaner must be left on the surface.
Once a week, throroughly clean the entire cera- mic glass surface with a commercial ceramic glass cleaner such as “Vitroclen”. Always ensure that the hob is dry after cleaning.
Stubborn soilage
.
.
To remove food that has boiled over or burnt on spots, use a glass scraper.
Place the glass scraper at an angle to the ceramic glass surface. Remove soiling by sliding the scra- per.
10