Electrolux 65300KF-an operating instructions Safety Instructions for the Installer

Page 27

Installation Instructions

Safety Instructions for the Installer

•A device must be included in the electrical installation that makes it possi￿ ble to isolate the appliance from the mains supply with a minimum contact separation of 3 mm.

Suitable isolation devices are e.g. cut-outs, fuses (remove screw type fuses from the holder), earth leakage trips and circuit breakers.

•In respect of fire protection, this appliance corresponds to type Y (EN 60 335-2-6). Only this type of appliance may be installed with a high cupbo￿ ard or wall on one side.

•It is not permitted to fit drawers below the cooking surface.

•Protection against electric shock must be provided by the installation.

•The kitchen unit in which the appliance is fitted must satisfy the require￿ ments of DIN 68930 in respect of stability.

•Built-in ovens and cooking surfaces are fitted with special connector sy￿ stems. They may only be combined with appliances with a matching system.

•All cut surfaces are to be sealed with a suitable sealant for protection against moisture.

•On tiled work surfaces, the joints in the area where the hob sits on the sur￿ face must be completely filled with grout.

•On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place.

•Ensure that the seal is correctly seated in the frame and that it is seated against the work surface without leaving any gaps. Additional silicon sea￿ lant must not be applied, this will make removal more difficult in the event of the need for service.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Ceramic Glass Cooking Surface 65300KF-anPlease read these operating instructions through carefully Dear customerContents What to do if Safety During Use SafetyElectrical Safety Child SafetyHow to Avoid Damage to Your Appliance Safety When CleaningDisposal Disposing of the packaging materialInformation on disposal Appliance Description Features of the hobCooking zone selection Heat Setting/Residual Heat displayControl Panel Main On/Off buttonTimer button and display field Heat setting selectionLock button and indicator Button/Indicators Triple Zone/Casserole ZoneInitial Cleaning Cooking zone safety switchPrior to Using for the first Time Releasing the safety switchTouch Control sensor buttons Switching on the applianceSwitching off the appliance Operation of the cooking surfaceCooking with the automatic warm up function Locking/unlocking the control panel Cooking without the automatic warm up functionSwitching the casserole zone on and off Switching the triple zone on and offSetting/changing the cooking time Ending the timer function early Tables and Tips PansTips on Saving Energy Operating Instructions Potato fritters Stubborn Soilage Cleaning and careCeramic Glass Light SoilageHob Frame Burnt on SoilageWhat to do if Remedial action in the case of malfunctionsWhat to do if Is shown in the display? Power Consumption Technical DataAppliance Dimensions Cut-Out DimensionsLegal stipulations, standards, directives Safety Instructions for the Installer Installing into a kitchen worksurface 600 This HOB Must be Earthed Electrical connectionCustomer Care 08705
Top Page Image Contents