Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
The compressor does not |
| This is normal, no error has | The compressor starts after | |
start immediately after chan- occurred. | a period of time. | |||
ging the temperature set- |
|
|
|
|
ting. |
|
|
|
|
|
|
|
|
|
Water on the floor or on sto- |
| Water drain hole is blocked. See the "Cleaning and | ||
rage shelves. |
|
|
| Care" section. |
If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre.
In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for any
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data:
1.To switch off the appliance, turn the temperature regulator to posi- tion "0".
2.Unplug the mains plug.
3.To change the light bulb, unscrew the light cover.
4.Unhook the light bulb cover as shown.
5.Change the defective light bulb.
6.Refit the light bulb cover and the screw.
D411 |
7.Put the refrigerator back into ope- ration.
15