Electrolux SG293N10, SG245N10 user manual Adjustning the thermometer display, Switching off

Page 8

--18

ACTION FREEZE

--18

ACTION FREEZE

Once set, the temperature display shows the current temperature inside the freezer.

Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet.

It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use. The thermostat recalls the previously set temperature.

Adjustning the thermometer display

On delivery, the cabinet's thermometer is set to show the average temperature during normal operation conditions. If the cabinet is used during other operational conditions, for example, in warmer surroundings, with a lot of food or if the cabinet is run entirely or partially without accessories the thermometer display can be adjusted for these conditions.

When adjusting the thermometer display, the cabinet should be working and freezing should not be active. Press the shut down button for the Setting the temperature "+" and the "-" button simultaneously and hold them down for about 5 seconds. As confirmation, the sound will buzz with a short signal. The thermometer is now set for display of warmer food products. To return to normal display, repeat the same process. As confirmation, the buzzer will give off a loud signal.

Information: It is very important to press the buttons at exactly the same time.

Please observe that the display will not change immediately. Instead, the temperature of the cabinet will successively change internally.

Switching off

Switch off the cabinet by pressing the power switch.

Keep the button pressed for approx. 1 second.

--18

ACTION FREEZE

Power to the cabinet is completely interrupted only when the power plug is disconnected.

Temperature inside the freezer

To ensure that foodstuff will keep for a long time, be sure that the temperature inside the freezer is -18°C or below.

Please note, however, that the energy consumption increases as the temperature decreases.

The built-in temperature display shows the warmest temperature inside the freezer. If the temperature is measured using a thermometer, put it between the products since this will reflect the real temperature in the frozen products. It is normal that the built-in temperature display shows a temperature slightly above that measured in other ways.

72

Image 8
Contents Gefrier Congélateur Congelatore Freezer We were thinking o f y ou Welcome to the world of Electrolux Scrapping old appliances Contents For the User Safety instructionsChild Safety Temperature display Yellow indicator lampAlarm shut-off button Setting the temperatureTemperature inside the freezer Adjustning the thermometer displaySwitching off Alarms and other features Door open alarm Temperature alarmTemperature memory FreezingPractical advice on freezing Suitable storage periodsThawing Cabinet interior Freezer drawersHint and Tips Ice cubesSaving energy Food StorageMaintenance and Cleaning CleaningProtect the environment Removing the ventilation grilleProblem Possible cause / Remedy Audible alarm + flashing redTo change the lamp Defrosting the freezerIt is too warm inside FreezerToo much frost and ice are ProducedMains Cable Cleaning Installation of distanceInstalling the cabinet Remove the transport supportsClimate ClassifiCation Door ReversalElectrical connection Kundendienst European Guarantee LU4 9QQ Page Page 8184090-00/27

SG245N10, SG293N10 specifications

Electrolux has long been at the forefront of kitchen appliance innovation, and their SG293N10 and SG245N10 models are no exceptions. Designed for modern kitchens, these built-in gas hobs offer both functionality and aesthetic appeal, ensuring they complement any cooking space.

The SG293N10 boasts a powerful 3.5kW burner, ideal for achieving high-temperature cooking, whether you’re searing meat or boiling water rapidly. This model features a versatile configuration that accommodates various pot sizes, ensuring efficient heat distribution. The SG245N10, on the other hand, emphasizes energy efficiency while still delivering impressive performance with its 2.5kW burners. The two-burner setup is perfect for smaller kitchens, providing enough capacity for everyday cooking without overwhelming available space.

Both models are equipped with advanced flame control technologies that grant users precise command over heat levels. This feature is particularly beneficial for delicate dishes that require careful temperature management. Additionally, the hobs come with high-quality cast iron supports that not only enhance the durability of the product but also ensure stability for your pots and pans. The sturdy build provides a professional feel, allowing home cooks to enjoy restaurant-quality results.

Safety is paramount in kitchen appliances, and Electrolux has incorporated various safety features into both the SG293N10 and SG245N10. The automatic ignition system provides convenience and reduces the risk of accidents, while the flame failure safety device ensures the gas supply is cut off if the flame goes out, preventing potential hazards.

Another significant characteristic of these hobs is their sleek, easy-to-clean surfaces. The stainless steel finish not only adds a modern touch to your kitchen but also simplifies maintenance. Food spills and splatters can be wiped away effortlessly, allowing you to spend less time cleaning and more time enjoying your culinary creations.

Overall, the Electrolux SG293N10 and SG245N10 gas hobs represent a blend of innovative technology, robust design, and user-friendly features. Whether you’re a seasoned chef or a cooking enthusiast, these models provide the versatility and reliability needed to elevate your culinary experience to new heights. With an emphasis on performance, safety, and ease of use, Electrolux continues to set high standards in kitchen appliance design.