Electrolux Z 9 18 40-4 i manual Alarm reset button, Switching the Appliance off

Page 21

FROSTMATIC

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.

1.The FROSTMATIC function is switched on by pressing the FROSTMATIC but- ton. The yellow light illuminates.

If the FROSTMATIC function is not ended manually, the appliance switch off the FROSTMATIC function after 48 hours. The yellow light goes out.

2.The FROSTMATIC function can be ended manually at any time by pressing the FROSTMATIC button again. The yellow light goes out.

Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (O) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (O) will continue to flash, although the buzzer has stopped.

When the alarm button is pressed, the warmest temperature reached in the compartment flashes on the indicator.

Switching the Appliance off

To switch off, hold down the ON/OFF button for approx. 5 seconds. This will result in a countdown from "3" to "1" taking place in the temperature display. On reaching "1" the fridge will switch off. The temperature display will go off.

Note:

The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Following connection to the mains power sup- ply, the appliance returns to the same operating state as before the inter- ruption of main power.

If the appliance is not going to be used for an extended period:

1.Switch off the appliance, holding down the ON/OFF button until the display goes off (see above).

2.Remove the mains plug or switch off or turn out the circuit breaker or fuse.

3.Defrost the freezer compartment and clean the appliance thoroughly (see section: “Cleaning and Maintenance”).

4.Finally, leave the doors open so as to avoid a build up of odours.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Santo Z 9 18 40-4 Dear customer Contents Safety of children SafetyIntended use Prior to initial start-upCase of malfunction Daily OperationAppliance Packaging Information DisposalDisposal of old Appliances DisposalShelf holders Remove transport safeguardTemperature setting buttons Operating and indicator panel FridgeDesired temperature means Actual temperature meansInstallation of the carbon filter Temperature displayChanging the charcoal filter Turbocoolmatic Starting Up Setting the TemperatureInterior Accessories Storage ShelvesVariable Inner Door Humidity control Longfresh 0C compartmentDrawer divider Tips Correct storageRiper the fruit, the shorter the storage time Always store animal food packed and dry Switching off the appliance Operating and indicator panel freezer Plug the mains plug into the mains socket Ice packsSwitching the Appliance off Alarm reset buttonFreezing and storing frozen food Freezing Calendar Preparation of Ice CubesDefrosting Fridge defrosts automaticallyNever use metal tools to scrape off the frost Cleaning and CareEnergy Saving Tips After cleaning wipe with fresh water and rub drySymptom Possible Cause Remedy What to do ifCorrecting Malfunctions Changing the light bulb Regulations, Standards, GuidelinesCustomer Care Department Service and Spare PartsStandard guarantee conditions European GuaranteeExclusions Electrical Connection InstallationPositioning Housing dimensionsYour appliance needs air Reversing the doorCopyright by AEG

Z 9 18 40-4 i specifications

The Electrolux Z 9 18 40-4 i is a sophisticated and powerful vacuum cleaner designed to meet the needs of modern households. Known for its efficiency and ease of use, this model embodies a blend of advanced technology and user-focused design.

One of the standout features of the Z 9 18 40-4 i is its high suction power, which ensures thorough cleaning on a variety of surfaces. This model uses a robust motor that delivers consistent performance, making it capable of tackling dust, dirt, and debris effectively, whether on carpets, hard floors, or upholstery.

The vacuum cleaner also integrates advanced filtration technology. It is equipped with a HEPA filter, which captures even the tiniest particles, including allergens and dust mites, making it an excellent choice for allergy sufferers. This feature improves indoor air quality and provides a healthier living environment.

For convenience, the Electrolux Z 9 18 40-4 i includes a bagless design, eliminating the need for disposable bags and reducing ongoing costs. The transparent dust container allows users to see when it needs to be emptied, making maintenance straightforward. Additionally, the container is easy to detach and clean, ensuring that users can maintain optimal performance without hassle.

Another notable characteristic of the Z 9 18 40-4 i is its lightweight and ergonomic design. Weighing significantly less than many traditional vacuum models, it can be maneuvered easily around furniture and up and down stairs. The vacuum also features a comfortable grip and an adjustable handle, which allows users to control it with ease.

The model also comes with a variety of attachments and tools, providing versatility for different cleaning tasks. A turbo brush is ideal for removing pet hair from carpets and furniture, while crevice tools and dusting brushes enable effective cleaning in tight spaces and on delicate surfaces.

In terms of storage, the Z 9 18 40-4 i is designed with compactness in mind. It can be stored easily in small spaces, and the retractable cord feature adds to its user-friendly characteristics.

Overall, the Electrolux Z 9 18 40-4 i vacuum cleaner stands out for its blend of power, advanced filtration, user-friendly design, and versatile cleaning capabilities. It offers consumers a reliable solution for maintaining a clean and healthy home environment.
Top Page Image Contents