Installation, Positioning, Rear spacers

INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers.

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

100 mm
A	B
10 mm	10 mm
NP00
D200

45°

PR60

ER 8126/1 B specifications

The Electrolux ER 8126/1 B is a sophisticated and advanced refrigerator designed to cater to modern-day needs for efficiency, convenience, and style. This model, which is part of Electrolux's well-respected lineup, brings together cutting-edge technology and thoughtful design to enhance food storage and preservation.

One of the standout features of the ER 8126/1 B is its impressive Energy Efficiency Rating. This refrigerator is designed to consume minimal energy while delivering optimal cooling performance, aligning with today's environmentally-conscious consumer preferences. By reducing energy consumption, users not only save on utility bills but also contribute to a more sustainable future.

The refrigerator boasts a spacious interior, accommodating a generous amount of groceries and perishables. With adjustable shelves and versatile compartments, organizing food items becomes a breeze. This flexibility allows users to customize the space according to their individual needs, whether it's storing large bottles, fruits, or deli meats.

A key technology integrated into the Electrolux ER 8126/1 B is the No Frost system. This innovative feature eliminates the need for manual defrosting, maintaining consistent temperatures throughout the unit and preventing ice buildup. This not only simplifies maintenance but also helps preserve the freshness and flavor of stored foods.

In terms of cooling, the refrigerator employs advanced cooling systems that ensure uniform temperature distribution. This ensures that every shelf and compartment is consistently cooled, which is vital for food safety and longevity. Additionally, the Multi-Air Flow system circulates air effectively, preventing hotspots and keeping produce crisp and fresh for longer.

The design of the Electrolux ER 8126/1 B is as impressive as its performance. With its sleek black finish, it seamlessly fits into any kitchen decor, lending a modern touch to the space. The intuitive control panel allows users to easily adjust settings and temperatures, ensuring that food items are kept in optimal conditions.

Furthermore, the ER 8126/1 B is designed with noise reduction in mind. Its quiet operation ensures that it runs silently in the background, allowing for a peaceful home environment without distracting hums or vibrations.

In conclusion, the Electrolux ER 8126/1 B stands out for its energy efficiency, spacious design, and advanced technologies that simplify food storage and enhance freshness. Its blend of functionality, thoughtful design, and modern aesthetics makes it an ideal choice for households seeking a reliable and stylish refrigerator.