Electrolux C 7 1440 i installation instructions Symptom Possible Cause Remedy

Page 15

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

 

 

Appliance is not switched on

 

 

 

 

 

Mains plug is not plugged in

Appliance does not work.

 

or is loose.

 

 

 

Fuse has blown or is defective.

 

 

 

 

 

 

 

 

 

 

Socket is defective.

 

 

 

 

 

 

Appliance cools too much.

 

Temperature is set too cold.

 

 

 

 

 

 

 

Temperature is not properly

 

 

adjusted.

 

 

 

 

 

Door was open for an exten-

 

 

ded period.

The food is too warm.

 

 

 

A large quantity of warm food

 

 

was placed in the appliance

 

 

within the last 24 hours.

 

 

 

 

 

The appliance is near a heat

 

 

source.

 

 

 

Interior lighting does not work. Light bulb is defective.

Switch on the appliance.

Insert mains plug.

Check fuse, replace if neces- sary.

Mains malfunctions are to be corrected by an electrician. Turn the temperature control knob to a warmer setting. Please look in the "Initial Start Up" section.

Open the door only as long as necessary.

Turn the temperature control knob to a colder setting.

Please look in the "Installation location" section.

Please look in the "Changing the Light Bulb" section. Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than

Heavy build up of frost, possi- bly also on the door seal.

The compressor does not start immediately after changing the temperature setting. Water on the floor or on sto- rage shelves.

Door seal is not air tight (pos- sibly after reversing the door).

This is normal, no error has occurred.

Water drain hole is blocked.

approx. 50 °C). At the same time shape the warmed door seal by hand until it sits cor- rectly.

The compressor starts after a period of time.

See the "Cleaning and Care" section.

During prolonged periods of low room temperatures,ie;10°C and low- er, the compressor on single compressor fridge freezer can remain inoperative during this time .

This is due to the air temperature within the refrigerator compart- ment being maintained at 6°C or under thus not calling the thermo- stat to energise the compressor .

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Santo C 7 14 40 Who thinks ecologically acts accordingly Dear customerContents Prior to initial start-up SafetySafety of children Intended useAppliance Packaging Information ServiceDisposal Daily OperationRemove transport packaging Description of the applianceDisposal of old Appliances Setting 0 Off Starting up and temperature regulationInterior Accessories Storage ShelvesVariable Inner Door Fresh food refrigeration Freezing and storing frozen food There is an ice pack in one drawer of the freezer Storage Goods Symbols/Freezing CalendarIce pack Preparation of Ice CubesFrost DefrostingCleaning and Care Switching off the applianceEnergy Saving Tips Something Not WorkingDry the appliance thoroughly Symptom Possible Cause Remedy Screw Put the refrigerator back into opera- tion Changing the light bulbPurchase date Service and Spare Parts0870 5 Customer Care DepartmentGuarantee Conditions Electrical Connection InstallationPositioning Your appliance needs airReversing the door Width Housing dimensionsHeight Depth44 mm Instructions for building-inSeparate parts A, B, C, D as shown in the figure Apply covers B into the relevant holesFix cover C on guide a until it clips into place Fix cover D on guide B until it clips into place Regulations, Standards, GuidelinesPage Page 2222 10/03

C 7 1440 i specifications

The Electrolux C 7 1440 i is an innovative vacuum cleaner designed to deliver exceptional cleaning performance across various surfaces. With its sleek design and powerful features, it effectively combines functionality and convenience, making it a must-have for any household.

One of the standout features of the Electrolux C 7 1440 i is its powerful motor, which provides impressive suction capabilities. This motor ensures thorough cleaning on carpets, hard floors, and even delicate surfaces. With multiple power settings, users can easily adjust the suction based on the type of surface they are cleaning. This versatility allows for more efficient dust and debris removal while protecting different flooring types.

The vacuum cleaner is equipped with advanced filtration technology, featuring a high-efficiency particulate air (HEPA) filter. This filter captures allergens and fine particles, making it an excellent choice for households with allergies or respiratory concerns. The HEPA filter is washable, promoting sustainability by reducing the need for replacements.

Another notable feature is its ergonomic design, making it user-friendly. The lightweight construction enhances maneuverability, allowing users to navigate between rooms effortlessly. The vacuum cleaner also boasts a long reach, thanks to its extended cord and hose system, enabling users to clean large areas without the hassle of changing outlets frequently.

The Electrolux C 7 1440 i also comes with a variety of attachments, including a crevice tool, dusting brush, and upholstery nozzle. These tools make it easy to clean tight spaces, delicate surfaces, and upholstery, ensuring that every corner of the home can be easily maintained.

In addition, the vacuum cleaner is designed with noise reduction technology, allowing for quieter operation without compromising suction power. This means users can clean at any time without disturbing others, making it a perfect choice for families or apartment living.

Overall, the Electrolux C 7 1440 i is a comprehensive cleaning solution that combines power, efficiency, and user comfort. With its innovative features and thoughtful design, it effectively meets the demands of modern households, ensuring a cleaner and healthier living environment.
Top Page Image Contents