Electrolux C 9 18 43-4i Starting Up Setting the Temperature, Holiday function

Page 8

During normal operation, the temperature currently present in the fridge (ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the fridge temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1.Plug the mains plug into the mains socket.

2.Press ON/OFF button. The green mains pilot indicator illuminates. The appliances start.

3.Press either the “C“ or “E“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

4.Set the required temperature by pressing the “C“ or “E“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperatu- re is adjusted by 1 °C.

From a food safety point of view +5 °C should be considered sufficiently cold for storing food in the fridge.

5.Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the stora- ge temperature within the fridge is reached quickly you can store food immediately after switching on.

COOLMATIC

The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator.

1.The COOLMATIC function is switched on by pressing the COOLMATIC but- ton. The yellow light illuminates.

The COOLMATIC function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The COOLMATIC function is ended automatically after a period of 6 hours.

2.The COOLMATIC function can be ended manually at any time by pressing the COOLMATIC button again. The yellow light goes out.

Holiday function

The holiday function sets the temperature at +15°C. This function allows you to keep the refrigerator shut and empty during a long holiday period (e.g. the summer holidays) without the formation of a bad smell.

8

Image 8
Contents Santo C 9 18 Dear customer Contents Safety Safety of ChildrenIntended Use Prior to Initial Start-UpService DisposalDaily Operation Appliance Packaging InformationShelf holders Remove Transport PackagingDisposal of Old Appliances Temperature display Operating and indicator panel FridgeTemperature setting buttons Starting Up Setting the Temperature Holiday functionInterior Accessories Storage ShelvesVariable Inner Door Variable Storage BoxOperating and indicator panel Freezer Pressing button P the buzzer stops Alarm reset buttonPlug the mains plug into the mains socket Switching the Appliance off Fresh Food Refrigeration Freezing and Storing Frozen FoodThere are two ice packs in one drawer of the freezer Ice PackPreparation of Ice Cubes Symbols on the drawers show different types of frozen goods Replace the plug in the power socketFreezing Calendar DefrostingNever use metal tools to scrape off the frost Switching Off the ApplianceCleaning and Care Appliance back on Energy Saving TipsWarm water with a little washing-up liqiud added Symptom Possible Cause Remedy Something Not WorkingChanging the Light Bulb Service and Spare Parts 0870 5Customer Care Department Customer Care DepartmentGuarantee Conditions Guarantee ConditionsInstallation Electrical ConnectionYour Appliance Needs Air Housing DimensionsPositioning Regulations, Standards, Guidelines Page Page Page 03/06