Electrolux N 7 18 40-4i Something Not Working, Symptom Possible Cause Remedy

Page 16

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

 

 

Appliance is not switched on

 

 

 

 

Mains plug is not plugged in

Appliance does not work.

 

or is loose.

 

 

 

Fuse has blown or is defective.

 

 

 

 

 

 

 

 

 

Socket is defective.

 

 

 

 

 

Appliance cools too much.

 

Temperature is set too cold.

 

 

 

 

 

 

 

Temperature is not properly

 

 

adjusted.

 

 

 

 

Door was open for an exten-

 

 

ded period.

The food is too warm.

 

 

A large quantity of warm food

 

 

was placed in the appliance

 

 

within the last 24 hours.

 

 

 

 

The appliance is near a heat

 

 

source.

Interior lighting does not work. Light bulb is defective.

Switch on the appliance.

Insert mains plug.

Check fuse, replace if neces- sary.

Mains malfunctions are to be corrected by an electrician. Turn the temperature control knob to a warmer setting. Please look in the "Initial Start Up" section.

Open the door only as long as necessary.

Turn the temperature control knob to a colder setting.

Please look in the "Installation location" section.

Please look in the "Changing the Light Bulb" section. Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than

Heavy build up of frost, possi- bly also on the door seal.

The compressor does not start immediately after changing the temperature setting. Water on the floor or on sto- rage shelves.

Door seal is not air tight (pos- sibly after reversing the door).

This is normal, no error has occurred.

Water drain hole is blocked.

approx. 50 °C). At the same time shape the warmed door seal by hand until it sits cor- rectly.

The compressor starts after a period of time.

See the "Cleaning and Care" section.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Santo N 7 18 Dear customer Who thinks ecologically acts accordinglyContents Safety Safety of childrenIntended Use Prior to Initial Start-upService DisposalDaily Operation Appliance Packaging InformationDescription of the appliance Remove transport packagingShelf holders Starting up and temperature regulation Setting 0 OffControl Panel of Freezer Compartment Quick-freezing Interior Accessories Storage ShelvesVariable Inner Door Variable Storage BoxFresh Food Refrigeration Freezing and storing frozen foodIce pack There are two ice packs in one drawer of the freezerPreparation of Ice Cubes Storage Goods Symbols/Freezing CalendarDefrosting Switching off the appliance Cleaning and CareFreezer Inner walls of the freezer are automatically defrostedWhen everything is dry switch the appliance back on Energy Saving TipsSymptom Possible Cause Remedy Something Not WorkingChanging the light bulb Service and Spare Parts Customer Care DepartmentGuarantee Conditions Guarantee ConditionsInstallation Electrical ConnectionYour appliance needs air PositioningReversing the door Housing Dimensions HeightDepth WidthInstructions for building-in 50mm Fix cover C on guide a until it clips into place Regulations, Standards, Guidelines Fix cover D on guide B until it clips into placePage AEG

N 7 18 40-4i specifications

The Electrolux N 7 18 40-4i is a standout appliance engineered for modern kitchens, providing advanced features and cutting-edge technologies that enhance cooking experiences. With its sleek design and user-friendly interface, this product not only looks good but also excels in functionality.

One of the key characteristics of the Electrolux N 7 18 40-4i is its energy efficiency. Designed to minimize power consumption, this appliance boasts an impressive energy rating, helping consumers save on their electricity bills while reducing their environmental footprint. The energy-efficient operation does not compromise performance, as this model offers powerful cooking capabilities.

Equipped with advanced cooking technologies, the Electrolux N 7 18 40-4i features innovative heating elements that ensure even cooking and precise temperature control. This means that whether you are baking, roasting, or broiling, the results will be consistent and reliable every time. The appliance also incorporates a range of cooking modes that cater to different culinary techniques, allowing users to explore their gastronomic creativity.

A significant advantage of the Electrolux N 7 18 40-4i is its intuitive digital display, which provides clear feedback on cooking settings. This feature allows for greater control over cooking times and temperatures, making it easier to achieve perfect results. User convenience is further enhanced by the appliance's easy-to-navigate menu, which simplifies the selection of various functions and presets.

Another notable feature is the spacious interior, which accommodates large dishes, making it ideal for family meals or entertaining guests. The inclusion of multiple racks allows for cooking different dishes simultaneously, maximizing efficiency in the kitchen.

Durability is another hallmark of the Electrolux N 7 18 40-4i. Constructed with high-quality materials, this appliance is built to withstand the demands of daily use. Its streamlined exterior is easy to clean, ensuring that maintenance is hassle-free.

In summary, the Electrolux N 7 18 40-4i is a versatile and efficient kitchen appliance that incorporates modern technologies to enhance cooking experiences. With its combination of energy efficiency, advanced cooking features, user-friendly design, and robust durability, it stands as an excellent choice for anyone looking to elevate their culinary skills.
Top Page Image Contents