Electrolux ERN 2821 manual D724 PR266

Page 17

Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).

Fasten the appliance with 4 screws provided in the kit included with the appliance.

(I = short) (P = long)

Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.

Apply covers (C-D) on joint cover lugs and into hinge holes.

Snap vent grille (B) and hinge cover (E) into position.

Separate parts Ha, Hb, Hc, Hd as shown in the figure.

2

D023

I

P

D724
D	C
	E
		B
	Ha	Hb
	Hc
		Hd
PR266

17

Image 17

Contents Instruction Book Installation Important Safety InformationContents Setting the temperature Before usingOperation Freezer compartmentThawing Frozen food storageMaking ice cubes Fresh food refrigerationPositioning the door shelves Movable shelvesEvent of a Power Failure Energy Saving AdviceHints and Tips Food StorageInternal cleaning Maintenance and CleaningWhen the appliance is not in use External cleaningRefrigerator DefrostingSomething not Working Symptom Solution7 0 5 9 2 9 9 2 Service and Spare PartsCustomer Care Department Standard guarantee conditions Guarantee ConditionsEuropean Guarantee This guarantee does not coverStar Rating Technical Specifications Shelf holders Installation Positioning Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsInstructions for totally built-in appliances Door reversal Recess dimensionsD724 PR266 8mm D734 Electrolux plc