Electrolux ERN 15300 manual Ca mm

Page 17

Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.

Apply covers (C-D) on joint cover lugs and into hinge holes.

Snap vent grille (B) and hinge cover (E) into position.

Separate parts Ha, Hb, Hc, Hd as shown in the figure.

Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.

D724
D	C
	E
		B
	Ha	Hb
	Hc
		Hd
PR266

ca. 50 mm
	90°
	2
	1 m
		m
	90°
ca. 50 mm	2
	2
	1 m
		m

17

Image 17

Contents Instruction Book Installation Important Safety InformationContents Setting the temperature Before usingOperation ThawingNormal Operating Sounds Fresh food refrigerationMovable shelves Positioning the door shelvesEvent of a Power Failure Energy Saving AdviceHints and Tips Food StorageInternal cleaning Maintenance and CleaningWhen the appliance is not in use External cleaningRefrigerator DefrostingSomething not Working Symptom Solution7 0 5 9 2 9 9 2 Service and Spare PartsCustomer Care Department Standard guarantee conditions Guarantee ConditionsEuropean Guarantee This guarantee does not coverStar Rating Technical SpecificationsPositioning InstallationGreen and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsInner door reversal Door ReversalRecess dimensions Ca mm 8mm Fix cover Hd on guide Hb until it clips into place Electrolux plc