Electrolux 3250-6KG manual Changing the light bulb

Page 16

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and disconnect from the mains supply. Light bulb data: 220-240 V, max. 15 W

1. To switch off the appliance, turn the temperature regulator to position "0".

2. Unplug the mains plug.

3. To change the light bulb, unscrew the light cover.

4. Unhook the light bulb cover as shown.

5. Change the defective light bulb.

6. Refit the light bulb cover and the screw.

7. Put the refrigerator back into opera- tion.

D613

16

Image 16
Contents ÖKO-SANTO 3250-6 KG Dear customer Who thinks ecologically acts accordinglyContents Safety Service DisposalAppliance Packaging Information Disposal of old AppliancesRemove Transport Packaging Starting up and temperature regulation Operating and Indicator panelTemperature adjustment with ambient temperature below +16C Interior Accessories Setting 0 OffHeight of the storage shelves can be adjusted Storage shelvesAdjusting the upper door rack Fresh food refrigerationFreezing and storing frozen food Frozen food Symbols/Freezing Calendar Preparation of Ice CubesDefrosting RefrigeratorSwitching off the appliance Leave the freezer compartment door openCleaning and Care Energy Saving Tips Something Not WorkingFood is too warm Changing the light bulb Service and Spare Parts 0870 5Guarantee Conditions Guarantee ConditionsInstallation Electrical ConnectionPositioning Rear spacers Reversing the doorProceed as follow Pull off ventilation grille D and remove cover GSlide the refrigerator compart- ment door onto the top pin Regulations, Standards, Guidelines 2222