GXR4 SPECIAL INSTRUCTIONS FOR IMPORT APPLICATIONS (TOYOTA/MITSUBISHI)
GXR4 models have flanges that can be removed to facilitate easy placement in tight spots, such as in some import vehicles (FIG. 3). Remove only the flange(s) that are necessary to make the speaker fit the chosen location. Secure the speaker with at least two opposing flanges. In some vehicles, you may have to bend or angle (but not break) one of the two flanges to get the proper fit when installing the speakers in your dashboard. To remove flanges, use tin snips. Do not use a sander or grinder, as that could cause fine metal shavings to fall into the voice coil and driver suspension units.
FIG. 3
EX340
USE TIN SNIPS TO REMOVE FLANGES
6 | Contact Polk Customer Service: |