Electrolux 1254-6 iU installation instructions Defrosting

Page 21

Defrosting

During use and when the door is opened, moisture is deposited as frost inside the appliance, particularly on the evaporator melts. This frost must be removed from time to time using the soft plastic scraper supplied. Under no circumstances use hard or pointed objects for this purpose.

The freezer should always be defrosted when the layer of frost has reached a thickness of approx. 4 millimetres. Defrost should be carried out once a year regardless of the amount of frost that has built up. A good time for defrosting is when the appliance is empty or contains only little food.

Each temperature rise reduces the keeping qualities of your frozen food. Around 12 hours before defrosting your freezer, switch over to fast freeze to build up a low temperature reserve in the frozen food.

Warning!

Do not use electrical heating appliances or any other mechanical or artificial devices to speed up the defrosting process.

Do not use defrosting sprays, they can be hazardous to your health and/or contain substances that damage plastics.

Caution! Do not touch frozen food with wet hands. Your hands could stick to the food and can cause skin abrasions.

Remove frozen food, wrap it in several layers of newspaper and store it, covered, in a cool place.

Switch off the appliance and unplug it, or pull the fuse or switch off the circuit breaker.

Remove all drawers except the bottom one. The bottom drawer serves as a practical container to collect the water from the thawing ice. Tip: To speed up the defrosting process, place a pan with warm water in the appliance and close the door. Remove pieces of ice that have fallen before they completely defrost.

Remove the bottom drawer and dry the interior of the bottom com- partment thoroughly.

After defrosting, thoroughly clean the freezer compartment and inte- rior fittings ( see "Cleaning and Care" section).

21

Image 21
Contents ÖKO-ARCTIS 1254-6 iU Dear customer Contents Safety of children Important Safety InstructionsPrior to initial start-up RefrigerantCase of malfunction Daily OperationRemove transport packaging DisposalAppliance Packaging Information Disposal of old AppliancesInstallation Location InstallationLeft door opening Reversing the doorPage Building the appliance in under a worktop Mounting furniture door Screw appliance into place Place the covering strip Fitting the plinth Power supplyThis appliance may not correspond with Electrical ConnectionDescription of the appliance Prior to Initial Start-UpView of the appliance Red remperature pilot light 4 comes on when Operating and indicator panelOpen Door warning Temperature WarningStarting up and temperature regulation Ice packFreezing and storing frozen food Page Storage Goods Symbols/Freezing Calendar Preparation of Ice CubesTips Defrosting Cleaning and Care Switching off the applianceMagnetic door seal Energy Saving Tips What to do ifCorrecting Malfunctions Appliance does not work, no pilot light is illuminated Symptoms Possible Cause RemedyOccurred Period of time Help us to Help You Service & Spare PartsCustomer Care 08705Regulations, Standards, Guidelines Noises during OperationClicks HummingPage Page