Electro-Voice FRi-152/85 Dimension Drawings, Architectural & Engineering Specs

Page 4

Dimension Drawings:

Top View

Front View

Side View

Architectural & Engineering Specs:

The two-way full range loudspeaker system shall incorporate a 15” LF transducer and a 2” (51mm) voice coil HF compression driver. The LF driver shall be mounted in a vented enclosure tuned for optimum low-frequency response. The HF driver shall be loaded on a constant-directivity horn with a nominal coverage pattern of 80° (h) x 55° (v). An internal passive filter network shall provide acoustical crossover and system equalization. Input panel shall easily change from passive to biamp operation via internal connector. System frequency response shall vary no more than +/-3 dB from 42 Hz to 15 kHz measured on axis. The loudspeaker shall produce a sound pressure level (SPL) of 98 dB on axis at 1 meter. It shall handle 350 watts of amplifier power long term (EIA Standard), and shall have a nominal impedance of 8 ohms. The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 7-ply cross-grain-laminated plywood and shall employ extensive internal bracing. It shall be finished in aliphatic polyurethane. Input connectors shall be two at 2 terminal barrier strips. A total of twelve 3/8-16 threaded mounting/suspension points shall be provided, (three each on top and bottom, two per side, two on rear). The front of the loudspeaker shall be cloth coverable with a powder-coated perforated 16 GA steel grille.

The two-way loudspeaker shall be the Electro-Voice model FRi-152/85.

FRi-152/85Part Numbers

1152-3393

- Unfinished

1152-3386 - Black

1152-3387 - White

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 2/2003

Part Number 38110-136 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Image 4
Contents FRi-152/85 General DescriptionBlock Diagram FRi-152/85 Full Range LoudspeakerFrequency Response BeamwidthEngineering Data Sheet Horizontal 1/3 Octave PolarsDimension Drawings Architectural & Engineering Specs

FRi-152/85 specifications

The Electro-Voice FRi-152/85 is a powerful two-way loudspeaker designed for various sound reinforcement applications, making it a favorite among sound engineers, event organizers, and venue operators. Delivering exceptional audio quality and performance, this model embodies the reliability and innovation that Electro-Voice is known for in the professional audio industry.

At the heart of the FRi-152/85 is its impressive driver configuration, which includes a 15-inch woofer and an 8-inch midrange transducer. This combination allows the speaker to deliver a wide, balanced frequency response ranging from 45 Hz to 20 kHz. With such a broad frequency range, the FRi-152/85 excels in reproducing full-spectrum music and providing clear vocals, making it suitable for live events, concerts, and DJ performances.

One of the standout features of the FRi-152/85 is its advanced waveguide technology. The speaker utilizes an asymmetrical horn design that enhances coverage pattern while minimizing distortion. This ensures that every seat in the audience experiences a consistent sound quality, regardless of their position relative to the speaker. The design also helps to manage feedback effectively, allowing for greater amplification without compromising audio clarity.

The FRi-152/85 is housed in a rugged, weather-resistant enclosure, built to withstand the demands of touring and outdoor events. The durable construction not only protects the internal components but also contributes to the speaker’s acoustic performance. The enclosure features multiple rigging points, which enable flexible mounting options, whether suspended from above or positioned on the ground.

Connectivity is straightforward, with multiple input options that support various sound systems and configurations. The speaker is equipped with high-quality binding posts and a Speakon connection, ensuring reliable and efficient signal transfer. Additionally, the FRi-152/85 can be easily integrated into existing audio setups, making it a versatile choice for both permanent installations and rental services.

In summary, the Electro-Voice FRi-152/85 stands out as a robust and versatile loudspeaker, equipped with cutting-edge technologies and designed for professional sound applications. With its superior audio performance, rugged build, and flexible deployment options, it meets the needs of sound professionals looking for reliability and excellence in every setting. Whether for a concert, conference, or immersive auditory experience, the FRi-152/85 is a standout solution that delivers on its promises.