High-Speed Oven Specifications | Electrolux E30SO75ESS, E30SO75FPS

High-Speed Oven

E30SO75FPS professional series

11/16"

22 7/8"

Allow at least 12" clearance for door depth when open

24" min.

Power supply location (left bottom rear)

30"

21 1/4"

21 3/8"

min.

21 7/8"	22 3/8" min.
max.	22 7/8" max.

21 7/32"

2" (visible gap)**

	36" min.
23 5/8"	required
	distance

to floor

5/8"

**When used in combination with another Electrolux ICON® built-in product, a minimum clearance of 2 5/8" required from bottom of High-Speed Oven cutout to top edge of companion product’s faceplate, leaving a 2" visible gap between both product faceplates

30" min.

20 1/4"

16 3/4"

22 3/4" * (critical

dimension)

Full base required to support 150 lbs.

240V/60 Hz grounded electrical outlet should NOT be located within shaded area

*Critical dimension – MUST be applied

30" High-Speed Oven Specifications

•Product Weight – 115 Lbs.

•Voltage Rating – 240V/ 60Hz/15 or 20 Amps

•Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line.

•Connected Load (kW Rating) @ 240 Volts = 3.3kW

•Amps @ 240 Volts =13.2 Amps

•Oven has a 6-15 plug, requiring a 6-15 receptacle.

•Always consult local and/or national electric codes.

•Allow at least 12" clearance for oven door depth when open.

•Minimum 22-3/4" deep cutout dimension is critical for proper installation, to ensure that oven’s faceplate will fit flush against cabinet front.

•Base must be level and cabinet front must be square.

•Grounded outlet should NOT be located in shaded area, as indicated.

•High-Speed Oven is NOT approved to be used under counter.

•High-Speed Oven can be built in alone or is approved to be used in combination with any Electrolux ICON® Single Wall Oven and/or Warmer Drawer. (Refer to model-specific Combination Installation Specification pages on web.)

•When used in combination with another Electrolux ICON® built-in product, a minimum clearance of 2-5/8" required from bottom of

High-Speed Oven cutout to top edge of companion product’s faceplate, leaving a 2" visible gap between both product faceplates.

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

•Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs.

Electrolux Major Appliances, N.A.

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com	High standards of quality at Electrolux Home Products, Inc. mean we are
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca	constantly working to improve our products. We reserve the right to change
	specifications or discontinue models without notice.

E30SO75FPS 01/09

Printed in the U.S.A.