Fit System
Bain Marie Units
The new Self Service Fit System is a flexible solution with compact dimensions to solve the problems of food servery in any location. It is versatile and trendy (with its appealing aesthetics thanks to the cherry wood finish or the stainless steel panelling). The bain marie units are ideal for the maintenance at the correct temperature of hot food in containers and the cupboards can be used as a storage areas for crockery. The models detailed on this sheet are bain marie units (in stainless steel finish and cherry wood finish) 750, 1125 and 1500 mm in lenght (2,3 and 4 GN).
Bain marie units include:
• - wheels
-pannelings in stainless steel or with cherry wood finish
-doors on the operator side in stainless steel or with cherry wood finish
-1 tray slider in stainless steel or with cherry wood finish
-1 overshelf with hot lights
•Well with drainage tap and rounded corners to facilitate cleaning operations. The well dimensions allow the storage of GN 1/1 containers (2 in the model 750 mm in length, 3 in the model 1125 mm in length and 4 in the model 1500 mm in length) or various combinations of containers, all with a maximum height of 200 mm (available as accessories).
•304 AISI stainless steel top with rounded edges.
•Manual water filling is standard; an electrovalve to fill up with water available as special.
•Thermostatically controlled temperature can be set from +20 to +90°C, at ambient temperature, following HACCP rules.
•Digital control panel.
•Endowed with
•Electronic overheating protection.
•The cupboards on the operator side, are closed by doors (in stainless steel or with cherry wood finish).
320113
•The tray slider is constructed in 304 AISI stainless steel tubing or with cherry wood finish and is installed on the customer side. The tray slider can also be folded down to facilitate passage of the units through doorways.
•All units are mounted on four wheels, 150 mm in height (two with brakes), but can be mounted on 150 mm high feet (as special).
•Optional tilting plinth can be installed to cover the feet as special.
•All models comply with the standards required by the main international approval bodies and are H marked.