Electrolux 318 201 016 manual Solutions to Common Problems, Drawer is not Level

Page 11

Solutions to Common Problems 11

IMPORTANT

Before calling for service, review this list. It may save you both time and expense. This list includes common experiences that are not the result of defective workmanship or material in your Warm & Serve Drawer.

DRAWER IS NOT LEVEL

Poor installation. Place a level on the cutout bottom. Make sure bottom is level.

Be sure cutout bottom is strong and stable enough to adequately support drawer (and wall oven, if applicable).

CANNOT MOVE APPLIANCE EASILY

Appliance must be accessible for service.

Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

WARMER DRAWER DOES NOT OPERATE

Make sure cord/plug is plugged tightly into outlet.

Service wiring is not complete. Contact your dealer, installing agent or authorized servicer.

Power outage. Check house lights to be sure. Call your local electric company for service.

Image 11
Contents 318 201 016 08019 Rev. C Use & Care GuideQUESTIONS? Finding InformationMake a Record for Future USE Do not use the warmer drawer for storage SafetyImportant Safety Instructions Safety Important Safety Notice Arranging Warmer Drawer Rack Positions Setting ControlBefore Setting Warmer Drawer Control Setting Warmer Drawer ControlSetting Warmer Drawer Controls To Set the Humidity Controller Setting Humidity ControllerSetting Bread Proof Control To Enable the Bread Proof FeatureTo Remove Warmer Drawer General Care & CleaningSurfaces How to Clean Care & Cleaning TableCannot Move Appliance Easily Solutions to Common ProblemsDrawer is not Level Warmer Drawer Warranty Warranty Information