Electrolux 240400112 manual Removing Stainless Steel Doors and Handles, To Remove Doors

Door Removal and Reversal Instructions (continued)

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1.Remove two screws attaching handle to top of refrigerator door.

2.Remove button plug using edge of putty knife.

3.Remove screw on side of refrigerator door and remove handle.

4. Reverse freezer and refrigerator handles as shown in figure 3.

Refrigerator Door Without Trim

TO ATTACH REFRIGERATOR HANDLE:

1. Secure side of handle to door and replace plug button.

2. Secure handle to top of door.

Figure 3 - Handle Reversal

REMOVING STAINLESS STEEL DOORS AND HANDLES

Use care when using tools near surface of stainless steel doors to avoid scratching.

To Remove Doors

Stainless steel doors are not reversible. Follow these steps to remove doors.

1. Remove toe grille and top hinge cover.

2. Remove top hinge and lift freezer door off of center hinge pin. Set door aside.

3.Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge to slide out.

6. Remove bottom hinge. Reinsert two outside screws in holes and tighten.

7. Reverse steps 1 - 6 to reinstall doors

To Remove Handles

1. Firmly hold freezer handle while loosening set screws with 3/32” allen

wrench. Remove freezer handle.

Typical Handle

2. Repeat step 1 for refrigerator door.

9