Electrolux Z 9 18 42-4 I Prior to Initial Start-Up, Starting up and temperature regulation

Page 40

Prior to Initial Start–Up

☞Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”).

Standby time

The oil for automatic lubrication contained in the compressor may flow into the refrigeration circuit if the appliance is transported in an inclined position. To allow the oil to flow back into the compressor, wait approximately 1 hour before placing the appliance in operation.

Starting up and temperature regulation

☞1. Insert the plug into the plug socket. When the refrigerator compart- ment door is opened, the internal lighting is switched on.

2.Press ON/OFF button.

The green mains pilot indicator and the temperature display illuminate.

3.Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

4.Set the required temperature by pressing the „+“ (WARMER) or „-“ (COLDER) buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. With each further press of one of the two buttons, the DESIRED tempera- ture is adjusted by 1°C.

Adjustable temperature range: +3°C to +8°C.

Note: From a food safety point of view, +5°C for the refrigerator com- partment and -18°C for the freezer compartment should be con- sidered cold enough as a storage temperature.

5.Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

The compressor will start and then run automatically.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place.

In order for the appliance to run properly in certain conditions a slight heating of the back surface of the inner container can take place.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Santo Z 9 18 42-4 Verehrter Kunde Inhaltsverzeichnis Sicherheit EntsorgungSicherheit Bestimmungsgemäße VerwendungVor der ersten Inbetriebnahme KältemittelIm Alltagsbetrieb Im StörungsfallEntsorgung Information zur GeräteverpackungEntsorgung von Altgeräten EntsorgungshinweiseAufstellen Transportschutz entfernenAufstellort Ihr Kühlgerät braucht Luft Türanschlag wechselnNischenmaße AchtungElektrischer Anschluss Tasten zur Temperatureinstellung BedienblendeTemperaturanzeige Einsetzen des Aktivkohlefilters Wechsel des AktivkohlefiltersVor Inbetriebnahme Inbetriebnahme Temperatur einstellenTurbo COOLMATIC/FROSTMATIC Turbo COOLMATIC-TasteGerät abschalten FROSTMATIC-TasteVariable Innentür InnenausstattungFlaschenhalter Longfresh 0C Kaltraum Feuchte einstellenRichtig lagern SchubladenDieser Scublade ist die Luftfeuchtigkeit nicht regelbar TippsRichtwerte für die Lagerdauer für frische Lebensmittel Salate, Gemüse Einfrieren und Tiefkühllagern Einfrieren und Tiefkühllagern Eiswürfel bereiten AbtauenDer Kühlraum taut automatisch ab Gefrierfach abtauenAbtauen Reinigung und Pflege Was tun, wenn Tipps zur Energie-EinsparungAbhilfe bei Störungen Lampe auswechseln Was tun, wennBetriebsgeräusche Bestimmungen, Normen, RichtlinienKlicken SummenFachbegriffe KältemittelkreislaufVerdampfer KompressorDear Customer Contents Safety Safety of childrenIntended use Prior to initial start-upDaily Operation Case of malfunctionDisposal Appliance Packaging InformationDisposal of old Appliances DisposalInstallation Location InstallationRemove transport packaging Housing dimensions Your appliance needs airRehingeing the door Electrical connectionTemperature setting buttons Control panelTemperature Display Air FilterInstallation of the charcoal filter Changing the charcoal filterPrior to Initial Start-Up Starting up and temperature regulationStandby time Turbo Coolmatic Button Switching off the appliance Frostmatic ButtonInterior Accessories Storage shelvesVariable Inner Door Bottle HolderLongfresh 0C compartment Humidity controlThis drawer the humidity is not adjustable Correct storageDrawers TipsStorage time in the Longfresh 0C compartment for fresh food Riper the fruit, the shorter the storage time Freezing and storing frozen food Animal food always store packed and dryTips Preparation of Ice Cubes DefrostingFridge defrosts automatically Defrosting the freezer compartmentCleaning and Care Energy Saving Tips What to do if Symptom Possible Cause RemedyCorrecting Malfunctions Changing the light bulb Customer Service Noises during OperationClicks HummingRegulations, Standards, Guidelines Technical terminology Refrigerant CircuitEvaporator CompressorPage

Z 9 18 42-4 I specifications

The Electrolux Z 9 18 42-4 I is a cutting-edge vacuum cleaner that embodies the latest advancements in cleaning technology. Designed with the modern home in mind, this model not only delivers powerful suction but also presents a host of features focused on convenience and efficiency.

One of the standout features of the Electrolux Z 9 18 42-4 I is its lightweight design, which makes it easy to maneuver around the home. Weighing in at just a few kilograms, this vacuum is ideal for users who need a portable option that can tackle dirt and dust in various spaces without the hassle of heavy equipment.

The powerful motor boasts advanced suction technology, ensuring that even the most stubborn dirt and debris are effectively lifted from carpets and hard floors. Its multi-surface cleaning capability allows users to seamlessly transition between different types of flooring, making it a versatile choice for any household setup. Additionally, the vacuum is equipped with a high-efficiency filter system that captures allergens and fine dust particles, contributing to improved indoor air quality.

Another notable feature is the ergonomic handle, which enhances comfort during extended cleaning sessions. The vacuum also incorporates an innovative dust container design that simplifies emptying and reduces the risk of contact with dirt. This user-friendly aspect is pivotal for maintaining hygiene within the home.

The Electrolux Z 9 18 42-4 I includes a range of specialized accessories, such as crevice tools and upholstery attachments, allowing users to tackle various cleaning tasks with ease. The vacuum’s design also caters to storage convenience, featuring a compact construction that allows it to fit easily into tight spaces when not in use.

Moreover, the appliance is designed to be energy-efficient, reducing overall electricity consumption while maintaining high-performance standards. The intuitive controls make operation straightforward, enabling users to adjust settings according to their cleaning needs.

In conclusion, the Electrolux Z 9 18 42-4 I sets a benchmark for modern vacuum cleaners, combining lightweight portability, powerful suction, advanced filtration, and user-friendly features. It is an ideal choice for anyone looking to enhance their cleaning routine with a reliable and efficient cleaning solution. Whether dealing with pet hair, dust, or everyday messes, this model stands out as a top contender in the world of home cleaning appliances.
Top Page Image Contents