Electrolux 593804600 service manual Programming the default parameters

Electrolux Professional S.p.A.

Ovens Platform Customer Support

Technical Training & Service

AOS_Q OVENS – Service manual

(593804600 - ENG)

1 Programming the default parameters

A	B	C	A	B	C	A	C
							1
	Fig. 1			Fig. 2			Fig. 3

Switch on the oven (fig. 1).

Just after the switching on, a lamp test will take place (fig 2).

At this point, during the lamp test phase, press the external service buttons A&C (fig.3) till you hear a beep.

B	C	A	B		B	1	2
1		1		1
Fig. 4			Fig. 5		Fig.	6

At this point press the right service buttons B&C till you hear a beep (fig. 4). Press then the left service buttons A&B till the beep (fig. 5).

At this point release the left button A keeping pressed the middle one B (fig. 6) till you hear 2 beeps.

Now release the middle button and, on the temperature display, you will see “PdEF”: the oven will switch off and on automatically.

File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional P.4/31