USE AND CARE
Inserting Super-Sized Beaters
1.Set the speed control to OFF and unplug the mixer.
2.Insert beater with collar into larger hole. Push beater in until it clicks into place. Insert the beater without collar into the smaller hole. Push beater in until it clicks into place.
Collar |
| Larger |
|
| Hole |
Cleaning and Removing Super-Sized Beaters
1.Before cleaning the SmartPower™ Mixer, set the speed control switch to OFF and unplug it from the wall outlet. Pull up on the beater release trigger and remove beaters from the mixer. Wash the beaters after each use in hot, soapy water or in a dishwasher.
2.NEVER PUT THE MOTOR HOUSING IN WATER OR OTHER LIQUID TO CLEAN. Wipe with a damp cloth or sponge. Do not use abrasive cleansers, which could scratch the surface.
QUICK REFERENCE CHART
Mixing Techniques
Always set the SmartPower™ Mixer on the lowest speed when you start mixing.
Speed 1/Low Speed
•Start mixing most ingredients together
•Combine dry ingredients
•Cream butter and sugar
•Mix heavy cookie doughs
•Mash potatoes/squash
•Add nuts, chips, dried fruit to doughs and batters
•Add flour to batters, or liquids to dry ingredients
•Start mixing frostings
•Start mixing cake mixes
Speed 2/Low Speed
•Add eggs to batters/doughs
•Whip potatoes/squash
•Mix pudding batters
Speed 3/Medium Speed
•Complete beating cake mixes
•Mix scratch cake batters
•Complete mixing frostings
•Whip potatoes/squash
•Beat whole eggs/yolks
•Start whipping cream
Speed 4/High Speed
• Complete whipping cream
Speed 5/High Speed
• Whip egg whites