CONTROL PANEL
1.Clock Display
Displays time of day and auto on time.
2.Function Knob
For setting time of day, and auto on time.
a. Auto On
The Auto On feature is used to program the start time of the brew cycle. The auto on time can be set for any time, day or night. The PM indicator is displayed on the LCD for nighttime program times.
b. Program Set
The Program Set function is used to set the time for the Auto On function.
c. Brew
The Brew function is used to start the brew cycle directly.
d. Clock Set
Used to program the time of day.
e.Audible Tone (not shown) The Brew Central ThermalTM Coffeemaker is equipped with an audible tone which will sound 5 times when the coffee has completed brewing (coffee will continue to stream from the filter for a few seconds after tone).
3.On/Off Button
Used to turn your coffeemaker on and off and works in tandem with the function knob.
4.Hour and minute Buttons
For use in setting hour and minute for time of day, and auto on time.
5.On/Off and Auto On Indicator Lights
6.Clean Setting
Used to indicate time to clean your coffeemaker to remove calcium buildup.
7.1-4 Cup Setting
For brewing smaller pots of coffee – it provides double heating of the water, so coffee is piping hot.
PROGRAMMING YOUR COFFEEMAKER
TO BREW COFFEE
1.Turn the function knob to “Brew.”
2.Press the On/Off button and release. The red “On” indicator light will illuminate and brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Press the On/Off button and release.
Note: This coffeemaker shuts off automatically after brewing is complete.
PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME
To set the time:
1.Turn the function knob to “Clock.”
a. Set Hour: Press and hold the “Hour” button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off.
Note: When the number count passes 12, the PM light will be displayed on the LCD.
b. Set Minutes: Press and hold the “Minute” button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time, turn the FUNCTION KNOB to any other setting or simply wait until the numbers stop blinking.
To program the Auto On (brew start time)
1.Turn the function knob to “Prog.”
2.Set the time you want coffee to begin brewing by using the minute and hour
instructions you used to set the time of day, in the To set the time section above.
3.Turn the function knob to “Auto On.” LCD will display the current time.
4.Press the On/Off button and release. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red indicator will come on as well, indicating that the brew cycle is starting. Both lights will go off when the brew cycle is complete.
NOTE: To reactivate the
1 - 4 Cup Setting
The 1- 4 cup setting button is used when you make small amounts of coffee. The
To use: When making a smaller amount, press the
Power Loss Back-up
7 | 8 |