Programming Your Coffeemaker, Setting the Clock

PROGRAMMING YOUR COFFEEMAKER

Setting the Clock

When the coffeemaker is plugged in, 12:00 will appear until you set the time.

Hold down the Hour or Minute button until the clock begins flashing. Press either button to select the desired time. Hold buttons down to scroll through the digits, or press and release to advance one digit at a time. When scrolling, the numbers will advance slowly and then speed up. When the number displayed approaches the desired time, press and release to advance one digit at a time. Be sure the PM indicator is on if a PM time is desired.

SETTING THE AUTO ON TIME

1.Press and hold the Program (PROG) button until the display flashes. You are now in program set mode.

2.Follow directions under SETTING THE CLOCK (above) to program your start-brew time.

3.Press the start button to exit program set mode. Mode will be exited automatically if no button is pushed. The Green indicator light should be illuminated to indicate that the Auto On function is on.

NOTE: To start brew time at the same time the next day, simply press PROG. When green indicator light comes on, brewing will start at the time you’ve selected.

CHARCOAL WATER FILTER

Your coffeemaker comes with a charcoal water filter that eliminates chlorine, bad tastes and odors from tap water.

Inserting the Water Filter

•Remove the filter from polybag and soak it, fully immersed, in cold tap water for 15 minutes.

•Lift the water filter holder out of the water reservoir (see diagram, page 5).

•Press down on the filter compartment and pull toward you to open.

•Place filter into the holder and snap it closed. Be careful – improper placement can tear the filter skin.

•Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds.

•Allow the filter to drain completely.

•Slide the water filter holder back into the channel in the water reservoir, pushing it down to the base of the unit.

NOTE: We recommend changing the water filter every 60 days or after 60 uses, and more often if you have

hard water.

Replacement filters can be purchased in stores, by calling Cuisinart® Customer Service, or at www.cuisinart. com.