Features and Benefits, USE and Care | Cuisinart 0511000, SPB-6

Note: Blades are sharp...

handle carefully.

FEATURES AND BENEFITS

c. Ice Crush Button

1.Cover

Just press on. Tightfitting seal resists leakage.

2.2-oz. Measured Pour Lid Allows you to measure and add ingredients without removing the cover.

3.48-oz. Glass Jar with Dripless Pour Spout

Has a unique, sturdy, widemouth design and a dripless pour spout for no-mess pouring.

4.Leak-proof Rubber Gasket (not shown)

Holds the glass jar snugly in position for safe operation.

5.High-quality Cutting Assembly with Patented Stainless Steel Blades

3	2
	1

8a 8

Press the ice crush button to begin crushing. This button is preset to the best speed for crushing ice.

9.Slip-proof Feet

Prevent movement during use and prevent damaging marks on countertops or tables.

10.Cord Storage (not shown)

Keeps countertop safe and neat by conveniently storing excess cord.

USE AND CARE

ASSEMBLY

To use your Cuisinart® SmartPower Classic™

Blender, begin by assembling the blender jar. (d)

	1. Turn the blender jar (a) upside down, and	(c)
	place it flat on a sturdy surface.	(c)
	place it flat on a sturdy surface.

2.	Position the rubber gasket (b) on the round
	opening on the bottom of the blender jar.	(b)
3.	Turn the cutting assembly (c) upside down,	(b)
3.	Turn the cutting assembly (c) upside down,
	and place the blade end in the blender

Is strong enough for all blender tasks, including tough jobs, from

ice crushing to chopping delicate herbs.

6.Locking Ring

Is self-aligning so that the glass blender jar slides easily into position.

7.Heavy-duty Motor Base

Is so sturdy and stable, it will not “walk” on your counter – even during ice crushing!

8.5-Speed Dial with Push-button Controls

a.5-Speed Dial Control

Choose from 5 speeds that include stir, chop, mix, purée and liquefy to blend ingredients to the desired consistency.

b.Pulse Button

Set the dial to the desired speed and press the Pulse button. Pulse at any speed to blend ingredients only as much as needed.

jar opening.	(a)

Note: Blades are sharp... handle carefully.

4.Secure the rubber gasket and cutting assembly into position by placing the smaller opening of the locking ring (d) on top

of the cutting assembly. Engage threads by twisting the locking ring clockwise until tightened. Make sure locking ring is tightly fastened to blender jar. Once assembled, turn the blender jar right side up.

5.Push the cover onto the top of the blender jar. Push the measured pour lid into the cover.

6.Place the blender jar on the motor base so that the jar markings are facing you and the handle is positioned to one side.

7.Plug in power cord. Your blender is now ready to be used.