Tips for Processing Food, Size, Quantity | Cuisinart DLC-1 instruction

should almost touch the bottom of the

Prep Bowl.

5.Hold the cover by its handle on the top, with the descending tab in about the 2 o'clock position (D).

While holding D. the Motor Base,

press the cover onto the Prep Bowl. Use the handle to turn it

MINI PRE	P PROCES	SOR	counterclockwise
			counterclockwise
	HI		until the
LO			until the

descending tab on the back locks into the slot on the column of the Motor Base. IF THE TAB DOES NOT FULLY OR COMPLETELY ENGAGE IN THE SLOT, THE MOTOR WILL NOT START.

6.Plug the cord into an electrical outlet.

7.Place one hand on the cover of the unit, and press the LO Speed-Control Lever with the thumb or forefinger of your other hand. Remove your thumb or finger from the control.

8.Now press and release the HI Speed-

Control Lever.

10.Now you are ready to process food.

11.Disassembling the Blade Assembly

Lift the Sheath. Holding the Blade Assembly stationary, carefully turn the Sheath Cylinder clockwise, then guide the Blade Assembly up over the Sheath.

TIPS FOR PROCESSING FOOD

Preparing the Food

Size:

Always cut large pieces of food into smaller pieces of even size – about 1/2 inch (12mm) to a side. If you don't start with pieces that are small and uniform, you will not get an even chop.

Quantity:

Do not overload the Prep Bowl. Overloading causes inconsistent results and it strains the motor. Use the quantities given in the recipe section as a guide. As a rule of thumb, remember that after being processed, food should not reach more than 2/3 of the way up the Sheath of the Blade Assembly.

Use the blunt edge for grinding coffee beans and spices, and for chopping hard food such as peppercorns, seeds, chocolate and nuts.

Selecting the Right Operating Speed Use low speed (LO Lever) for chopping, puréeing, and mixing food with the sharp edge of the blade.

Use high speed (HI Lever) for grinding and for chopping hard food with the blunt edge of the blade.

Note: Due to the powerful motor provided with this unit, Cuisinart recommends using one hand to support the Mini-Prep®during operation. This is especially true of the Hi speed.

Selecting the Right Lever Action Pulse action is best when you are using the sharp edge of the blade. Two or three pulses are often enough. Be sure to check the food frequently to prevent overprocessing. If you overprocess, you are likely to get a watery paste instead of a fine chop.

Continuous-hold action is best when you are using the blunt edge of the blade. You may have to operate the Mini-Prep®Processor for several

9.WHEN THE BLADE STOPS MOVING, remove the cover by turning it gently clockwise and lifting it straight up.

MINI PREP PROCESSOR

Selecting the Right Blade Edge Use the sharp edge for chopping, puréeing and mixing. It is the right choice, for example, for chopping soft, fragile food such as herbs, celery, onions, garlic and most cheese. It is also

the right choice for puréeing cooked vegetables, making mayonnaise and mixing salad dressing.

seconds to achieve the desired results with some food - as long as 20 seconds for some seeds, or 40 seconds for coffee beans.

When you operate the unit for more than 10 seconds, use a pulse action every 10 seconds or so to allow food to drop to the bottom of the Prep Bowl. This provides more consistent results.

DLC-1 specifications

The Cuisinart DLC-1 is a compact food processor that is designed to bring efficiency and convenience to food preparation tasks. With a sleek design and robust features, this model is perfect for home cooks looking to enhance their culinary experience. One of the standout characteristics of the DLC-1 is its powerful motor, which can effortlessly handle a variety of food processing tasks, from chopping vegetables to making purees and sauces.

This food processor comes equipped with a 21-ounce work bowl, which is ideal for smaller quantities of ingredients. Despite its compact size, the DLC-1 does not compromise on performance. The stainless steel blade is designed for precision cutting, ensuring that ingredients are processed to the desired consistency. Additionally, the bowl and blade are dishwasher safe, making cleanup after cooking simple and hassle-free.

Another notable feature of the Cuisinart DLC-1 is its user-friendly operation. The unit features a simple touchpad control that allows users to easily power the processor on and off, as well as control the speed settings. This makes it incredibly easy for cooks of all skill levels to use the machine effectively. The pulse action feature provides added control, allowing for quick bursts of power to achieve the perfect texture.

In terms of safety, the DLC-1 is equipped with a safety lock system that prevents the processor from operating unless the bowl is securely locked in place. This ensures that users can work confidently in the kitchen without fear of accidents. The durable construction of the processor means it is built to last, making it a worthwhile investment for any kitchen.

The Cuisinart DLC-1's compact design is another significant advantage; it can be easily stored in kitchen cabinets without taking up much space. This makes it an excellent choice for those with limited counter space. Moreover, its elegant appearance and stainless steel finish allow it to blend seamlessly with other kitchen appliances.

In summary, the Cuisinart DLC-1 is a versatile and powerful food processor that excels in delivering performance without sacrificing convenience or safety. Its thoughtful design, robust features, and user-friendly operation make it an essential tool for both novice and experienced chefs. Whether you need to chop, slice, or puree, the DLC-1 is ready to tackle your culinary challenges with ease.