Viking DEV900 specifications Install the Ventilator

Page 3

INSTALL THE VENTILATOR

ROOF INSTALLATIONS

1.Remove roofing nails from the upper 2/3 of the shingles around the cutout area and carefully lift the shingles to allow the back flashing sheet on the ventilator housing to fit under them.

2.Center the ventilator ring in the 11" diameter hole, making sure that the 1-1/4" diameter electrical wir- ing hole aligns with the hole in the wiring box.

3.Attach the ventilator to the roof with the six screws provided. All six holes in the back panel must be filled, or any moisture that may get inside the venti- lator housing could leak into the house.

4.Using a good grade of roofing cement, seal all of the shingles around the housing and flashing sheet as well as the mounting screw heads.

5.Bring electrical wiring through the hole in the wiring box and secure it according to local codes.

Figure 4

 

 

BLACK

 

 

TO

 

 

BLACK

 

 

120 VAC

WHITE

GREEN

LINE IN

TO

TO

 

WHITE

 

GREEN

 

 

6.Make the electrical connections with the proper connector for the type of wiring being used. Con- nect white to white, black to black, and the green or bare wire to green. See Figure 4.

7.Replace wiring box cover and screws. Do not pinch wiring under the cover.

8.Check for free movement of the damper before installing housing cover and screws.

INSTALL THE VENTILATOR

WALL INSTALLATIONS

1.Place a large bead of caulk on the back side of the housing along the outer edge.

2.Center the ventilator ring in the 11" diameter hole, making sure that the 1-1/4" diameter electrical wiring hole aligns with the hole in the wiring box.

3.Attach ventilator to the wall with the six screws provided. All six holes in the back panel must be filled, or any moisture that may get inside the ventilator housing could leak into the house.

4.Using a good grade of caulk, seal all around the mounting screw heads.

5.Bring electrical wiring through the hole in the wiring box and secure it according to local codes.

6.Make the electrical connections with the proper connector for the type of wire being used. Connect white to white, black to black, and green or bare wire to green. See Figure 4.

7.Replace wiring box cover and screws. Do not pinch wiring under cover.

8.Check for free movement of the damper before installing housing cover and screws.

9.Top and side flanges of the back plate may be covered with trim strips. Do not block grille opening at bottom with trim. It will adversely affect perfor- mance of the ventilator.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Viking Model DEV900 Exterior Mounted Ventilator SpecificationsPlan the Installation ALL InstallationsPrepare the Ventilator Prepare the Installation LocationRoof Installations Wall InstallationsInstall the Ventilator USE and Care Install the ROUGH-IN PlateCleaning Viking Range CorporationPlanification DE LA Pose Viking Modèle DEV900 Ventilateur Monté À L’EXTÉRIEURAvertissementavertissement SpécificationsPréparation DE L’EMPLACEMENT DE Pose Préparation DU VentilateurPoses SUR LES Toits Poses SUR LES Murs Pose DU VentilateurLubrification DU Moteur Pose DE LA Plaque DE RaccordementUtilisation ET Entretien Nettoyage

DEV900 specifications

The Viking DEV900 is a state-of-the-art device that blends cutting-edge technology with user-friendly features, designed specifically for various applications in industrial settings. It is engineered to enhance productivity while ensuring optimal performance and reliability, making it a robust solution for modern enterprises.

One of the standout features of the Viking DEV900 is its high processing power, which is driven by a state-of-the-art multi-core processor. This allows the device to handle intensive computational tasks with ease, making it suitable for data analytics, advanced simulations, and real-time processing. With its extensive memory and storage capabilities, users can easily manage large datasets and complex applications, ensuring that their operations run smoothly.

In terms of connectivity, the Viking DEV900 is equipped with a variety of ports, including USB, HDMI, and Ethernet, allowing it to connect to a wide range of peripherals and networks. It supports both wired and wireless communication protocols, enabling seamless integration into existing infrastructure. This versatility makes it an ideal choice for businesses that require a device that can adapt to different environments and technical requirements.

The device also features advanced security measures, including encryption and user authentication, ensuring that sensitive data remains protected against unauthorized access. This is particularly important in industries such as finance, healthcare, and government, where data integrity and confidentiality are paramount.

Another significant aspect of the Viking DEV900 is its durable design. Built to withstand harsh conditions, it features rugged housing that is resistant to dust and moisture. This durability makes it suitable for deployment in challenging environments, such as manufacturing floors, outdoor sites, and warehouses where traditional devices may struggle.

Moreover, the Viking DEV900 is designed with energy efficiency in mind, minimizing power consumption without sacrificing performance. This not only helps reduce operational costs but also supports sustainability initiatives by lowering the carbon footprint.

In summary, the Viking DEV900 stands out as a powerful, versatile, and reliable device that is well-suited for a wide range of industrial applications. Its robust technological features, combined with user-centric design and advanced security measures, make it a valuable asset for organizations looking to enhance their operational efficiency and security.
Top Page Image Contents