COMPACT DISC PLAYBACK
IMPORTANT ! The unit should not be carried around during CD playback. If the unit is bumped and shocked during playback, the disc may skip or stop.
1. Slide the FUNCTION switch to CD position, the POWER LED will turn on. The display will show the symbol “-
3. Insert a disc with the label side facing up. Press down near the center hole to make sure the disc is firmly seated on the spindle.
5. Press the PLAY/PAUSE |
|
button. Playback will begin |
|
on track 1 “PLAY” and |
|
“track no.” Will appear on |
|
the display. | Track number |
| currently playing |
2.Press the CD OPEN button to open the CD door.
4.Close the CD DOOR by pushing it down. The display will show the total tracks of the CD.
TO INTERRUPT PLAYBACK
Press the PLAY/PAUSE 
button once during playback. Playback pauses and the “PLAY” indicator flashes. Press the PLAY/PAUSE
button again to cancel pause and resume playback at the same point in the track. “PLAY” indicator stops flashing.
TO SKIP TO THE BEGINNING OF THE TRACK
1. Press either one of the 
REV / 
FWD skip buttons according to the desired skip direction.
2. Playback resumes from the selected track.
3. When the 
button is pressed once during playback, the player advances to the beginning of the next track.
4.When the 
button is pressed once during playback, the player returns to the beginning of the track being played. To back up to the beginning of the previous track press the button twice.
SEARCHING FOR A PASSAGE WITHIN A TRACK
Keep the 
/ 
button pressed during playback, and release
the button as soon as you recognize the desired passage. Normal CD playback will resume from this point.
TO STOP PLAYBACK
Press the STOP 
button to stop playback and the display shows the total tracks of the disc.
Note : After pressing the STOP 
button wait a few seconds for the disc to stop completely before opening the CD door.
9
PD6810_103106.P65 | 9 | 31/10/2006, 10:06 |