Viking manual Custom Door Panel, Specifications for FDB200/DFB450E Models

Page 5

Custom Door Panel

(Installation Option)

(Specifications for FDB200/DFB450E Models)

 

a

10"

(25.4 cm)

10-5/8"

(27.0 cm)

11-17/32"

 

 

(29.3 cm)

 

5/8"

 

 

5/8"

5/8"

(1.6 cm)

(1.6 cm)

(1.6 cm)

 

Use 1/4" router bit

ø1/8" 4 places

(.3 cm)

29"

29-3/4"

(75.6 cm)

(73.7 cm)

to

 

 

31-1/4”

 

(79.4 cm)

22-21/32"

(57.5 cm)

Have the overlay panel constructed per dimensions. The panel thickness MAY NOT exceed 5/8” (1.6 cm) for flush installation in most cabinets. Ensure that the design, construction, and installation of the panel overlay and its handle mounting is sufficient to reliably operate in this application with a maximum panel weight of 18 lbs. (8.2 kg.) Custom panels should not exceed 18 lbs. (8.2 kg.)

Obtain four screws with the proper thread type for the overlay material chosen. The screws MUST BE #8 flat head, 1-3/4” long and MUST BE stainless steel to avoid corrosion.

If dishwasher has a metal door skin installed, remove the four screws. DO NOT remove any other fasteners and ensure that only the proper screws are removed.

Carefully tighten each screw to secure the overlay and check to ensure that the overlay is square with the dishwasher door and cabinet opening and that the panel doesn’t interfere with the operation of the dishwasher.

Verify operation of the door counter balance springs after installation of the overlay panel. The additional weight of the overlay panel might require an adjustment to the preload of the counterbalance springs. If adjustment of the springs is required, please refer to the “Counter Balance Spring” section.

To remove face panel of dishwasher remove only the 4 Phillips screws - do not remove any other fasteners.

b

Position custom face panel on front of dishwasher.

c

23-9/32" (59.1 cm) with trim

or

23-7/8” (60.6 cm) without trim

NOTE: Back side of panel shown. Use caution not to drill through front of panel.

Use non-marring clamps to hold custom panel in place. Secure with #8 1-3/4”(4.5 cm) long, stainless steel flat head screws.

8

9

Image 5
Contents Viking Installation Guide Table of Contents If the use of a GFI is required, it should be Dimensions & Cutout Dimensions Custom Door Panel Specifications for FDB200/DFB450E ModelsSite Preparation General InformationWater Supply DrainTrim Installation Options not available on all units Hardwire Conduit OptionTrim Installation Options cont’d. not available on all units 11b Counter Balance Spring Adjustment If NecessaryFront Panel Removed Installation Procedure cont’dTesting for Leaks Performance ChecklistUnit Reset Final PreparationService & Registration
Related manuals
Manual 12 pages 38.69 Kb

200 specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.