Hardwire Conduit Option

Remove any loose items in the dishwasher and carefully lay the dishwasher on its back. NOTE: Be careful not to pinch hoses or power cord beneath dishwasher.

Loosen ground wire and wires on terminal block.

Loosen strain relief and remove cord.

NOTE: Other items are grounded in this location–these

items must remain grounded.

e	Green
	Ground

Trim Installation Options (not available on all units)

To install dishwasher without trim, remove the 6 screws (3 per side) and remove trim. To attach wiper gasket to dishwasher, pull protective film off adhesive back on wiper gaskets and apply to leading edge of dishwasher frame. Trim gasket to fit.

Remove bottom pan and front plate. Rapid removal of the bottom pan will cause damage to the moisture sensor. To remove the bottom pan for installation and servicing, slowly pull the bottom pan from the unit and disconnect the connector wire from the moisture sensor which is located on the floor of the bottom pan.

Black

Green White

Ground Common

UL approved strain relief

Run wires through bottom pan. Using a UL approved	1b
Run wires through bottom pan. Using a UL approved
strain relief, connect wires to terminal block.

Connect ground wire.

NOTE: Reinstall front plate and bottom pan.

200, 325E, 450E specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.