Rear Trim Accessories, Attaching Backguard

Rear Trim Accessories

ATTACHING BACKGUARD

Backguards come equipped with Nylon Spacers),which(SeeareFigureneeded1 to space the range off a combustible wall at a prescribed safe distance.

Important: If installing the range with a backguard against a combustible wall, then the spacers are mandatory and must remain in place on the backguard.

If installing the range with a backguard against a non-combustible wall, then the spacers can be removed (See Figure 2).

Once you determine whether or not your product needs the provided spacers, the backguard is ready to be attached.

Figure 1	Figure 2

Simply slide the backguard down onto the	Once the backguard is in position, attach using the
rear of the unit until it settles on the shoulder	(4) screws provided.
screws located on the back of the range.

screw holes

Rear Trim Accessories

ATTACHING HIGH-SHELF

Simply slide the high-shelf back down onto the rear of the unit until it settles on the shoulder screws located on the back of the range.

Once the high-shelf back is in position, attach using the (4) screws provided. Once secured to the range, place the top rolled edge (X) of the high shelf over the front lip of the high-shelf back.

HIGH-SHELF BACK	X
(rear view)

HIGH-SHELF

(side-view)

screw holes