Emerson ES28 Listening to Radio, Operation, Storing Preset Stations, Tuning to a Preset Station

LISTENING TO RADIO

OPERATION

1.) Press the POWER button to turn the unit ‘On’.

2.) Select the Tuner function by pressing the TUNER button.

3.) Select the desired band (AM or FM) with the BAND button.

4.) Tune to the desired radio station by pressing the TUNING UP or DOWN buttons on the unit or on the remote control.

5.) If you hold the TUNING UP or DOWN button for more than half a second the Tuner will begin to automatically scan until a strong signal is found.

6.) To turn off the radio, press the POWER button to switch the unit into standby mode.

STORING PRESET STATIONS

1.) Tune either automatically or manually (as described in steps 4 or 5 above) to the station to be stored.

2.) Press the PROG / MEMORY button once. “MEMORY” will flash in the display for 5 seconds. During this time you must select the desired memory location by pressing the REPEAT / MEMORY UP button.

3.) Press the PROG / MEMORY Button again to store the station at that location.

	POP
CH	MEMORY	STEREO
	FM	MHz
	POP
CH		STEREO
	FM	MHz

4.) The unit can store up to 20 FM stations, 20 AM stations.

TUNING TO A PRESET STATION

Select the desired station preset number by pressing the REPEAT / MEMORY UP button.

8

ES28_ib_0321.p65 8

21/3/2002, 11:10