PLAYING COMPACT DISCS
LOADING AND UNLOADING COMPACT DISCS
1.) Press the POWER 
button to turn the unit ‘On’.
2.) Select the CD function by pressing the CD button.
3.) Press the the CD Door Open / Close 
button to open the CD compartment.
4.) When the disc compartment has opened, insert the disc with the label side facing up. Push down in the center until disc is locked in place.
5.) Close the disc compartment by pressing the CD Door Open / Close 
button. When the compartment is fully closed, the disc will start turning automatically. The total number of tracks and playing time will appear in the display.
6.) The disc compartment may be opened at any time by first pressing the STOP
button and then pressing the CD Door Open / Close 
button. Remove the CD only after the compartment has fully opened and the disc has stopped spinning.
CAUTION
•Do not put anything except a compact disc into the compartment.
•Foreign objects can damage the mechanism.
•Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism.
•Never place more than one disc into the disc compartment at any time.
•If the disc is correctly loaded, the total number of tracks on the disc will be displayed.
NOTES:
After the disc compartment is fully closed, the disc information may not appear on the display. This means that the disc is improperly loaded (most likely it is upside down). To check, open the disc compartment again and reload the disc.
11
ES27_ib_drafts.p65 | 11 |
19/3/2002, 16:09