Cuisinart CBT-500C manual Cleaning and Maintenance, Your Blender

Page 7

9.TO DISLODGE FOOD: Use a rubber or plastic spatula to help remove food lodged around the cutting assembly. DO NOT

USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER OFF. Replace the cover and measured pour lid and continue blending, if necessary. Make sure spatula is not inside the blender jar before blending.

10.WHEN FINISHED BLENDING: Press the OFF button and unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not twist locking ring from blender jar when removing jar from motor base. Simply lift blender jar from motor base. Do not place hands into blender jar with blender plugged in.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® SmartPower Premier™ 600-Watt Blender from the electrical outlet before cleaning. The blender is made of corrosion-resistant parts which are easy to clean.

Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. If any part is damaged or blender jar is chipped or cracked, DO NOT

USE BLENDER.

Remove the blender jar from the motor base by lifting straight up and away. Twist off the locking ring by turning counterclockwise. Remove the cutting assembly and rubber gasket. Wash in warm soapy water, rinse, and dry thoroughly.

Place the locking ring in the upper rack of the dishwasher or wash in warm water.

CAUTION: Handle the cutting assembly carefully. It is SHARP and may cause injury. Do not attempt to remove blades from

cutting assembly.

Remove the blender jar cover and the measured pour lid. Wash in warm, soapy water; rinse and dry thoroughly, or place in upper rack of dishwasher. The blender jar must be washed in warm soapy water and rinsed and dried thoroughly. The blender jar can also be placed upside down in dishwasher.

Finally, wipe the motor base clean with a damp cloth to remove any residue, and dry thoroughly. Never submerge the motor base in water or other liquid, or place in a dishwasher.

Tip: You may wish to clean your blender cutting assembly as

follows: Squirt a small amount of dishwashing liquid into assembled

blender jar and fill halfway with warm water. Run on LOW for 15 seconds. Repeat, using clean tap water. Empty blender jar and carefully disassemble parts. Wash cutting assembly, gasket and locking ring in warm, soapy water. Rinse and dry all

parts thoroughly.

DOs and DON’Ts WHEN USING

YOUR BLENDER

Do:

•Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the blender motor base.

•Always use the blender on a clean, sturdy and dry surface.

•Always add liquid ingredients to the blender jar first, then add remaining ingredients. This will ensure that ingredients are uniformly mixed.

•Cut most foods into cubes approximately 1/2 inch (1.3 cm) to

1 inch (2.5 cm) to achieve a more uniform result. Cut all cheeses into pieces no larger than 1/2 inch (1.3 cm).

•Use the measured pour lid to measure liquid ingredients such as alcohol. Replace measured pour lid after ingredients have been added.

•Use a rubber or plastic spatula as needed, only when the blender is turned off. Never use metal utensils, as damage may occur to the blender jar or cutting assembly.

•Place cover on firmly. Always operate the blender with the cover on.

•Make sure locking ring is tightly attached to blender jar.

•Always remove locking ring, cutting assembly, and rubber gasket before cleaning.

•When scraping the blender jar with a spatula, remove the food from the sides of the blender jar and place food in the center of the blender jar, over the cutting assembly.

•When chopping fresh herbs, garlic, onion, zest, bread crumbs, nuts, spices, etc, make sure the blender jar and cutting assembly are completely dry.

•If food tends to stick to the sides of the blender jar when blending, pulse in short bursts.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CBT-500C Important Safeguards Introduction Table of ContentsCover Features and BenefitsQuick Reference Guide OperationSpeed Selection Guide To Stop Blending Process Your Blender Cleaning and MaintenanceDon’t Recipe TipsFruit and Yogurt Smoothie Fresh Fruit SmoothieTO-FRUITTI Smoothies Frozen Mango Margaritas Crême Caramel ShakeMONKEY-DOODLE Shake Mocha FrappéFrozen Daiquiri Frozen CosmopolitanTWO Pepper Hummus Chilled Gazpacho SUN-DRIED TOMATO, Garlic Herb Cheese SpreadChilled Melon Mango Soup Creamy Potato Leek Soup Cream of Asparagus SoupPerfect Popovers Creamy Tomato RED Pepper BisqueRicotta Spinach PIE Basic Vinaigrette Rustic Tomato SauceJapanese Carrot Ginger Dressing Cracked Pepper Parmesan DressingPesto Sauce Cajun Creole Spice Blend Wasabi Ginger SAUCE/MARINADECookie Crust Pumpkin PIE Quick Berry Sauce Classic Cherry ClafoutisChocolate Sauce Limited THREE-YEAR WarrantyMakers

CBT-500C specifications

The Cuisinart CBT-500C is a powerful blender that merges performance with style, catering to both culinary enthusiasts and everyday users. With its robust 500-watt motor, this blender is designed to handle a variety of tasks, from blending smoothies and soups to crushing ice and pureeing ingredients. Its high-performance capabilities make it a go-to kitchen appliance for those looking to create delicious and nutritious meals quickly and efficiently.

One of the standout features of the CBT-500C is its unique 56-ounce Tritan blending jar, which is not only durable and BPA-free but also designed for optimal blending performance. The large capacity allows users to prepare drinks or meals for the entire family, making it perfect for batch processing. The jar is also equipped with a pour spout, ensuring that serving and transferring contents is mess-free.

The blender features a sleek two-speed control system, allowing users to choose between low and high settings to achieve the desired texture. The high-speed option is particularly effective for creating smoothies and soups with a velvety-smooth consistency. Additionally, the pulse function adds versatility, enabling users to precisely control the blending process for chunky salsas or finer purees.

Cuisinart has integrated advanced technology into the CBT-500C, including its stainless steel blades, which are designed to withstand heavy use while delivering consistent results. These blades are not only efficient at blending but also feature a unique design that helps pull ingredients down toward the blades for thorough mixing.

Ease of use and cleaning are also major considerations in the design of the CBT-500C. The blender's jar, blades, and lid are all dishwasher safe, making cleanup quick and hassle-free. Furthermore, the non-slip base ensures stability during use, enhancing overall safety.

In summary, the Cuisinart CBT-500C is more than just a blender; it is an essential kitchen tool that combines power, functionality, and ease of use. Its impressive features, including a durable blending jar, efficient motor, and user-friendly controls, make it an excellent choice for anyone looking to elevate their culinary creations. Whether for everyday meals or more elaborate recipes, the CBT-500C stands ready to deliver outstanding results every time.
Top Page Image Contents