Cuisinart CBT-500 Series manual Cleaning and Maintenance, Your Blender

Page 7

9.TO DISLODGE FOOD: Use a rubber or plastic spatula to help remove food lodged around the cutting assembly. DO NOT

USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER OFF. Replace the cover and measured pour lid and continue blending, if necessary. Make sure spatula is not inside the blender jar before blending.

10.WHEN FINISHED BLENDING: Press the OFF button and unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not twist locking ring from blender jar when removing jar from motor base. Simply lift blender jar from motor base. Do not place hands into blender jar with blender plugged in.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® SmartPower Premier™ 600-Watt Blender from the electrical outlet before cleaning. The blender is made of corrosion-resistant parts which are easy to clean.

Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. If any part is damaged or blender jar is chipped or cracked, DO NOT

USE BLENDER.

Remove the blender jar from the motor base by lifting straight up and away. Twist off the locking ring by turning counterclockwise. Remove the cutting assembly and rubber gasket. Wash in warm soapy water, rinse, and dry thoroughly.

Place the locking ring in the upper rack of the dishwasher or wash in warm water.

CAUTION: Handle the cutting assembly carefully. It is SHARP and may cause injury. Do not attempt to remove blades from

cutting assembly.

Remove the blender jar cover and the measured pour lid. Wash in warm, soapy water; rinse and dry thoroughly, or place in upper rack of dishwasher. The blender jar must be washed in warm, soapy water and rinsed and dried thoroughly. The blender jar can also be placed upside down in dishwasher.

Finally, wipe the motor base clean with a damp cloth to remove any residue, and dry thoroughly. Never submerge the motor base in water or other liquid, or place in a dishwasher.

Tip: You may wish to clean your blender cutting assembly as

follows: Squirt a small amount of dishwashing liquid into assembled

blender jar and fill halfway with warm water. Run on LOW for 15 seconds. Repeat, using clean tap water. Empty blender jar and carefully disassemble parts. Wash cutting assembly, gasket and locking ring in warm, soapy water. Rinse and dry all

parts thoroughly.

DOs and DON’Ts WHEN USING

YOUR BLENDER

Do:

•Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the blender motor base.

•Always use the blender on a clean, sturdy and dry surface.

•Always add liquid ingredients to the blender jar first, then add remaining ingredients. This will ensure that ingredients are uniformly mixed.

•Cut most foods into cubes approximately 1/2 inch (1.3 cm) to

1 inch (2.5 cm) to achieve a more uniform result. Cut all cheeses into pieces no larger than 1/2 inch (1.3 cm).

•Use the measured pour lid to measure liquid ingredients such as alcohol. Replace measured pour lid after ingredients have been added.

•Use a rubber or plastic spatula as needed, only when the blender is turned off. Never use metal utensils, as damage may occur to the blender jar or cutting assembly.

•Place cover on firmly. Always operate the blender with the cover on.

•Make sure locking ring is tightly attached to blender jar.

•Always remove locking ring, cutting assembly, and rubber gasket before cleaning.

•When scraping the blender jar with a spatula, remove the food from the sides of the blender jar and place food in the center of the blender jar, over the cutting assembly.

•When chopping fresh herbs, garlic, onion, zest, bread crumbs, nuts, spices, etc, make sure the blender jar and cutting assembly are completely dry.

•If food tends to stick to the sides of the blender jar when blending, pulse in short bursts.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CBT-500 Series Important Safeguards Introduction Table of ContentsCover Features and BenefitsQuick Reference Guide OperationSpeed Selection Guide To Stop Blending Process Your Blender Cleaning and MaintenanceDon’t Recipe TipsTO-FRUITTI Smoothies SMOOTHIES, SHAKES, FRAPPÉS, Frozen BeveragesFresh Fruit Smoothie Fruit and Yogurt SmoothieFrozen Mango Margaritas MONKEY-DOODLE ShakeCrème Caramel Shake Mocha FrappéTWO Pepper Hummus DIPS/SPREADS AppetizersFrozen Cosmopolitan Frozen DaiquiriCream of Asparagus Soup To room temperature for 15 to 20 minutes before servingChilled Gazpacho Chilled Melon Mango SoupCreamy Tomato RED Pepper Bisque Creamy Potato Leek SoupRicotta Spinach PIE Perfect PopoversHeat the butter and olive oil in a Cuisinart Cracked Pepper Parmesan Dressing SAUCES/DRESSINGSRustic Tomato Sauce Basic VinaigrettePesto Sauce Japanese Carrot Ginger DressingWasabi Ginger SAUCE/MARINADE Preheat the oven to 375F Desserts Sweet SaucesCajun Creole Spice Blend Cookie Crust Pumpkin PIEQuick Berry Sauce Classic Cherry ClafoutisChocolate Sauce Or write to Cuisinart C.U.R.E Milford Road East Windsor, NJ Limited THREE-YEAR WarrantyIB-4234BTX

CBT-500 Series specifications

The Cuisinart CBT-500 Series is a standout among high-performance blenders, designed to cater to culinary enthusiasts and home cooks alike. Known for its powerful performance and sleek design, this blender elevates the blending experience with a range of features and technologies that enhance both usability and functionality.

At the heart of the CBT-500 Series is its robust 500-watt motor, which provides ample power to tackle a variety of blending tasks, from smoothies and soups to sauces and nut butters. The motor operates quietly, ensuring that users can blend without disturbing the household. Complementing the motor is a high-quality stainless steel blade system. These blades are designed to create a vortex that pulls ingredients down into the blades for consistent blending results.

One of the key characteristics of the CBT-500 Series is its versatility. With multiple speed settings, users can easily select the appropriate speed for their blending needs. The pulse function is especially useful for achieving the perfect texture in salsas or chunky sauces. Additionally, the blender features a BPA-free plastic jar that can hold up to 64 ounces of ingredients, allowing for large batches without the need for constant refilling.

The design of the Cuisinart CBT-500 Series is both functional and stylish. Its sleek, modern aesthetic fits seamlessly into any kitchen decor. The blender is equipped with an ergonomic handle for comfortable pouring and a wide mouth for easy loading of ingredients. The lid fits securely, featuring a removable measuring cup that allows for precise additions while blending.

Safety is also a top priority in the CBT-500 Series, with features such as a safety locking mechanism that ensures the blender cannot be activated unless the lid is properly secured. This attention to detail provides peace of mind during use.

In summary, the Cuisinart CBT-500 Series blends power, style, and convenience into one exceptional kitchen appliance. Its compelling combination of a powerful motor, stainless steel blade system, multiple speed settings, and ergonomic design makes it an excellent choice for anyone looking to elevate their blending game. Whether preparing a morning smoothie or a creamy soup for dinner, this blender is equipped to handle all culinary challenges with ease and efficiency.
Top Page Image Contents