PREPARATION FOR USE
UNPACKING AND SET UP
•Carefully remove the unit from the carton and remove all packing materials from the unit.
•The AC power cord is separate from the main unit. Make sure that the power cord is not accidentally thrown away with the packing materials.
•Carefully remove any small strips of tape which may have been used to keep the CD and Cassette doors closed during shipment.
•Open the CD compartment by lifting the “OPEN” tab on top panel. Inside the CD compartment you will see a white transit card which is used to prevent the laser
•Please save the carton and packing materials in the event that your unit ever needs to be returned for service. The original carton and packing materials are the only way to protect the unit from damage during shipment.
•Unwind the FM lead wire antenna and extend it to its full length.
•Remove the
4
MS7622_031504.p65 | 4 |
15/3/2004, 11:54