OVERALL DIMENSIONS
36" Sealed Burner Rangetops
357/8" (911)
81/2" (216) | 7 | 1/2" |
TO COOKING |
SURFACE | (191) |
281/2" (724)
91/4"271/2"
(235)(699)
20"
RISER
171/2"
121/2" (445)
(318) 10" 5" RISER
RISER
241/4" (616)
Unit dimensions may vary by ± 1/8".
SPECIFICATIONS
Exterior Finish |
| Stainless Steel |
Overall Width |
| 357/8" |
Overall Height |
|
|
(to cooking surface) | 81/2" | |
Overall Depth |
| 281/2" |
Opening Width |
| 36" |
Opening Height |
|
|
(to countertop) |
| 71/2" |
Opening Depth |
| 24" |
Electrical Requirements | 110/120 V AC | |
| 50/60 Hz, 15 amp circuit | |
Power Cord | 6' cord with grounded plug | |
Shipping Weight |
|
INSTALLATION SPECIFICATIONS
30" (762) TO 36" (914) |
TO BOTTOM OF
VENTILATION HOOD** | 18" (457) min |
6" (152) TO |
|
|
| 6" (152) TO |
|
COMBUSTIBLE* |
|
|
| COMBUSTIBLE* |
|
36" | (914) |
|
|
| 71/2" (191) |
|
|
| OPENING | ||
OPENING WIDTH |
|
| |||
| 36" | HEIGHT | |||
|
|
|
| ||
|
|
|
| (914) | |
PLATFORM |
| 16" | (406) | FLOOR TO | |
| COUNTERTOP | ||||
|
|
|
| ||
GAS AND ELECTRICAL |
| PLATFORM |
|
| |
THROUGH BOTTOM OF | 4" | TOP VIEW |
|
| |
PLATFORM | (102) |
|
|
|
|
| BACK WALL |
|
| ||
|
|
|
| ||
|
| E | G |
|
|
|
| 16" |
|
| |
|
| (406) |
|
|
13" (330) |
max |
PLATFORM |
INSTALLATION NOTES
•A riser is required for installations against a combustible surface.
•A Wolf pro wall, chimney, island ventila- tion hood or hood liner is recommended.
•For LP gas installations above 8,600' a high altitude conversion kit is required. For natural gas installations above 10,250', contact your authorized Wolf dealer.
*Minimum clearance from rough opening to combustible materials up to 18" (457) above countertop.
**36" (914) minimum clearance, 44" (1118) for charbroiler, from countertop to combustible materials without ventilation hood.
NOTE: For island installations, 12" (305) minimum clearance from back of rangetop to combustible rear wall above countertop.
Dimensions in parentheses are in millimeters unless otherwise specified.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. | 1/10 |