PROGRAMMED PLAYBACK
Notes:
•You can program up to 20 tracks on a disc to playback in any desired order. The same track number can be programmed to play several times if desired.
•There is no PROGRAM button on the remote control. The PROGRAM button is located on the main unit only.
•The player must be in the Stop mode to enter a program. You cannot enter a program while a disc is playing.
1.) Load your disc and wait for the total tracks to appear. If the disc is playing press the STOP 
button and wait for the total tracks to appear.
2.) Press the PROGRAM button on the main unit. The PROGRAM indicator and program number "01" begin flashing in the display.
3.) Press the SKIP/SEARCH ( 
/ 
) buttons to select the first track to be programmed.
(Example: Track Number 7).
PROGRAM 
PROGRAM
4.) When the desired track number appears in the display press the PROGRAM button again. The track number disappears and the program number advances to "02".
PROGRAM
5.) Press the 
/
buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button to enter that track in the program memory and advance the display to the next program number.
6.) Repeat Step 5 until you have entered up to 20 tracks in the memory.
17
MS7609_ib040303.p65 | 17 |
4/4/2003, 12:13