OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system ‘on’, rotate the
2.) Set the Function selector (PHONO/CD/TUNER) to the TUNER position.
3.) Set the Band selector (AM/FM) to the desired band.
4.) Rotate the TUNING control to tune to the desired radio station. If you tune to a strong FM Stereo station the FM ST Indicator will light and reception will be in stereo. If you tune to a weaker FM station, the reception will automatically switch to mono.
5.) Adjust the
6.) When you are finished listening turn the
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the cabinet slightly until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position and direction of this antenna until you find the position that provides the best reception.
9
NR305TT_050704.p65 | 9 |
7/5/2004, 10:31