
4.) The disc will spin for a few seconds as the player reads the disc.
Then the disc will stop and the display will show the total number of tracks on the disc.
5.) Press the ![]()
![]()
PLAY/PAUSE button to begin playback on track 1.
Track number “0 1” appears in the display and the
Play
indicator comes ‘On’.
6.) Adjust the VOLUME and X.BASS controls as desired.
7.) Playback will continue until the last track has played then the disc stops and
the Play
indicator goes ‘Off’, and the display will show the total number of tracks on the disc.
To stop playback before the disc ends press the
STOP/BAND button.
8.) If you are finished listening open the CD door and remove your disc.
9.) To listen to the Tuner or AUX, press the FUNCTION button as desired, or press the
STANDBY button to turn the power ‘Off’.
PAUSE Control
To pause momentarily during CD playback press the ![]()
![]()
PLAY/PAUSE button on the top panel again.
The sound stops and the Play
indicator flashes but the disc continues to spin.
Press the ![]()
![]()
PLAY/PAUSE button again to cancel the Pause mode and resume normal playback.
The sound resumes at the same point on the disc and the Play
indicator stops flashing.
2 1
ES830_012005.p65 | 21 |
20/1/2005, 11:15