Electrical & Gas Requirements General Information

Electrical & Gas Requirements

General Information

Rigid Connections:

•Incoming gas is brought from an intake pipe (not supplied) at the rear of the unit to the pressure regulator; then to the manifold pipe for distribution. The only connection necessary is from the service supply, through the shut-off valve (not supplied), to this intake pipe (not supplied) to the regulator supplied, but not connected through the cooktop.

In Massachusetts: This appliance must be installed with a 36” (3-foot) long flexible gas connector.

Initial Ignition of Burners

All cooktops are tested before leaving the factory. Field adjustments may be necessary for proper mixture of gas and air for proper operation. When the cooktop is connected to gas and electrical service, it should be adjusted by a qualified technician. If it is not, contact your dealer for the name of their authorized service agency in your area.

Gas conversions and initial installation adjustments are not the responsibility of the manufacturer. To convert the VGSU model to LP or natural gas, the orifice spuds and regulator must be physically changed. The proper conversion kit must be ordered from

CAUTION

BURN HAZARD

The use of cabinets for storage above the appliance may result in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be provided the risk can be reduced by installing a range hood that projects horizontally a minimum of 5” (12.7 cm) beyond the bottom of the cabinets.

Electrical Requirement

Normal grounded household current, 120 volts, 60 Hz, 15 amps, single phase. Electrical installation should comply with national and local codes.

Air Supply and Ventilation

Means must be provided for any heavy-duty cooking appliance to exhaust combustion waste product to the outside of the building. It is recommended that the cooktop be set under a powered, vented exhaust hood, or non-vented recirculating hood. Nothing should obstruct the flow of combustion and ventilation air.

CAUTION

Before placing the cooktop into operation, always check for gas leaks with a soapy water solution or other acceptable method.

DO NOT USE AN OPEN FLAME TO CHECK FOR LEAKS.

LP/Propane Conversion

The VGSU and DGSU models are field convertible to LP/Propane gas or natural gas. The orifice spuds and regulator must be physically changed. For the VGSU/DGSU models, order conversion kit NKPDC to convert to natural and LPKPDC to convert to LP/Propane. Gas conversions should be completed by a qualified technician. Refer to instructions in conversion kit for gas conversions.

your authorized service agency or dealer.

Proper Lighting and Shutdown Instructions

1.To ignite the surface burners, turn the knob counter clockwise to any position.

2.Upon ignition of the surface burner, turn the knob to the desired position, (HI, Med, or Low).

3.To shutdown the burner, turn knob clockwise to the OFF position.

4.In case of failure, shut the gas OFF using the installer supplied manual shut-off valve.

WARNING

This appliance shall not be used for space heating. This information is based on safety considerations.

•All openings in the wall behind the appliance and in the floor under the appliance shall be sealed.

•Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.

•DO NOT obstruct the flow of combustion and ventilation air.

•Disconnect the electrical supply to the appliance before servicing.

When removing cooktop for cleaning and/or service:

•Shut off gas at main supply

•Disconnect AC power supply

•Disconnect gas line to the inlet pipe.

•Lift appliance out of cabinet cutout.

Gas Manifold Pressure

Natural gas – 5.0” W.C.P.

LP/Propane – 10.0” W.C.P.

Flexible Connections

If the unit is to be installed with flexible couplings and/or quick disconnect fittings, the installer must use a flexible connector of at least 1/2” I.D. (1.3 cm) NPT with suitable strain reliefs and comply with ANSI Z21.41 and Z21.69 standards.

F20562D specifications

The Viking F20562D is a notable addition to the Viking lineup of horses, reflecting a blend of outstanding lineage and advanced breeding techniques. Known for its impressive performance and solid build, the F20562D is favored by equestrians for various disciplines, including dressage, eventing, and show jumping.

One of the main features of the Viking F20562D is its striking appearance. With a strong, muscular body and well-defined features, this horse boasts an impressive stature that commands attention in and out of the arena. Its coat is often a striking chestnut or bay, which adds to its visual appeal, along with harmonious conformation that supports agility and strength.

The Viking F20562D is equipped with advanced technologies that enhance its training and performance. One notable technology is the integration of genetic testing in its breeding program, which ensures that the horse inherits desirable traits from its lineage. This science-driven approach results in horses that not only perform well but also have longevity in their careers.

In terms of temperament, the F20562D is often described as intelligent and eager to please, making it an excellent partner for riders of different skill levels. Its trainability is enhanced by its willingness to engage in various activities, showcasing versatility that is highly sought after in competitive equine sports.

Furthermore, the Viking F20562D exhibits exceptional athleticism. With powerful hindquarters, this horse can execute intricate movements with ease, providing an edge in competitive events. Its agility allows for quick turns and responsive handling, making it a reliable choice for demanding competitions.

This horse also thrives on a well-maintained diet and tailored training regime, which includes conditioning exercises that optimize its physical capabilities. The combination of genetics, training, and care contributes to the horse's overall health and performance longevity.

In conclusion, the Viking F20562D represents the pinnacle of modern equestrian breeding. Its combination of striking physical features, advanced breeding technologies, desirable temperament, and exceptional athleticism makes it a standout choice for riders seeking a dependable and versatile partner in their equestrian endeavors. This horse is not only a testament to its breed's historical legacy but also a reflection of contemporary advancements in equine science and care.