Programmed Playback
The Programmed Playback feature allows you to program a total of up to 16 tracks in any desired order. You may program the same track to play several times within a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press the 
STOP button first to stop playback before beginning the programming steps below.
1.) Load the disc in the player and wait until the player has read the Table of Contents of the disc.
2.) Press the MEMORY button.
The MEMORY indicator will appear and the display will show Track “– – ” and Program Memory
3.) Then press the 
or 
buttons to select the fir s t tr ac k on the di s c to be programmed.
(Example: Track 07).
4.) Press the MEMORY button again to enter Track 07 in program memory #1.
The program memory number advances to
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you have entered up to 16 tracks in the CD program memory.
Note: You may also select the track numbers directly with the
•For tracks 1 through 9 simply press the corresponding number button.
•For tracks 10 and higher first press the “+10” button and then the corresponding button for the second digit. For example, for track 12, press “+10” and then press “2”.
29
ES79_080504.p65 | 29 |
9/8/2004, 10:21