OPERATING YOUR BREVILLE Freeze & Mix
2.Place the freezer bowl into the bowl locking recess of the mixer base and turn the bowl clockwise until the bowl locks securely into place.
NOTE
To remove or insert the freezer bowl, the mixer motor head must be raised and locked into the open position.
Attaching the paddle to the mixer motor head
NOTE
The Freezer bowl must assembled and used immediately after removing it from the freezer to prevent it from thawing.
1.Ensure the mixer motor head is in the raised/open position. Align the groove in the top of the Scraper Paddle with the locking pin on the spindle extending down from the mixer motor head.
2.Push the scraper paddle upwards and turn clockwise until it locks securely onto the locking pin on the spindle.
3.Lower the mixer motor head by depressing the tilt back button and gently pushing the mixer motor head down until it locks into the horizontal (closed) position.
Attaching the splash guard to the mixer motor head
1.To attach the splash guard, place bowl on mixer, make sure the motor head is in the up position, place the plastic splash guard on to the bowl, so that the groove lip of the guard sits inside the groove of the freezer bowl.
Using the Freeze & Mix
1.Ensure the speed control dial is set to the ‘Off’ position, plug the cord into a
2.Follow directions in the recipe for the ice cream or frozen desert being prepared.
3.Turn the mixer on the slowest speed setting, marked “folding/kneading” on the LED speed indicator band before adding any ingredients to the bowl. Once the freezer bowl has started to rotate add the mixture through the pouring spout of the splash guard and into the freezer bowl.
NOTE
Pouring the mixture into the freezer bowl before starting the mixer may cause the mixture to freeze prematurely.
4.Mix the ice cream/frozen desert until it has reached the desired consistency. Follow the table below for mixing guidelines.
NOTE
If adding
10